Tenders by City:

Showing results 10 in 20k+ tenders list

Ref. No: 52658498

  • Location: Raxaul, Bihar

  • Last Date: 09 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657367

GeM Tender
  • Location: Katihar, Bihar

  • Last Date: 25 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657365

GeM Tender
  • Location: Katihar, Bihar

  • Last Date: 25 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657363

GeM Tender
  • Location: Katihar, Bihar

  • Last Date: 25 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657362

GeM Tender

Ref. No: 52657361

GeM Tender
  • Location: Mushari, Bihar

  • Last Date: 19 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657360

GeM Tender
  • Location: Phulwari, Bihar

  • Last Date: 15 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657358

GeM Tender
  • Location: Phulwari, Bihar

  • Last Date: 15 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657357

GeM Tender
  • Location: Phulwari, Bihar

  • Last Date: 15 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657353

GeM Tender
  • Location: Phulwari, Bihar

  • Last Date: 15 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657348

GeM Tender
INDIAN ARMY

Supply Of Dimension Overall Size Shall Be 450Mm Wide At Bottom Of Legs Level And 455Mm Deep And 1200Mm High. All Wood Shall Be Of First Class Hard Wood Teak Mp. Front Two Legs Shall Be Of 25Mmx50Mm In Section And 450Mm High. The Rear Legs Shall Be Out Of 65Mmx50Mm Made To Shape As Shown On Drawing. The Front And Rear Legs At Seat Level Shall Be Joined By 40Mmx20Mm In Section Side Rails Provided Joining Front And Rear Legs. The Bottom Of Side Stiffeners Shall Be 100Mm Above The Bottom Of Legs. A Middle Stiffener Of 25Mmx40Mm In Section Joining The Side Stiffeners In The Middle Shall Be Provided As Shown On Drawing. For Seat Cushion A Frame Shall Be Made With 75Mmx20Mm In Section Front And Rear Wooden Horizontal Rails Joined By 40Mmx20Mm In Section Wooden Side Rails. 70Mmx10Mm Batten Shall Be Provided In The Middle. 45Mmx10Mm Batten Shall Be Provided With Three Equal Gaps As Shown On Drawing. 50Mm Thick 32 Density Foam Shall Be Provided To The Chair Which Shall Be Covered With Leatherised Rexene Of Best Quality As Approved By Ge. At The Back Rest The Shape Of Legs Shall Be As Shown On Drawing. Rails Of 45Mmx25Mm In Section Shall Be 40Mm Apart From Legs And Joined By 10Mm Dia Teak Wood In Vertical Two In Numbers And 12Mm Dia Teak Wood In Horizontal Four In Numbers. Back Shall Have Vertical Battens 20Mmx25Mm In Section. 50Mm Thick Synthetic Foam Of 32 Densitcovered With Laeatherised Rexene Made To Shape As Shown On Drawing Shall Be Fixed Over 10Mm Thick Plywood Commercial. All Wood Surfaces Exposed To View When Placed In Position Shall Be French Polished With Lacquer Finish As Directed By Engineer-In-Charge.

  • Location: Phulwari, Bihar

  • Last Date: 15 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657345

GeM Tender
INDIAN ARMY

Supply Of Over All Size Shall Be 900Mm Long 900Mm Wide And 760Mm High. All Wood Shall Be Of Teak Wood Of First Class Quality Mp Teak. Four Legs Shall Be 55Mm And 35Mm In Section And 741Mm High Joined Together With Teak Wood Plank Of 20Mm And 100Mm In Section Except 345Mm Width Of Drawer. Where Teak Wood Plank Shall Be Of 20Mm And 40Mm. Four Stiffeners Of 20Mm And 100Mm In Section 441Mm Long Shall Be Provided With The Sides Of Drawers Making Four Equal Spaces To Have Four Drawers Of 300Mm And 300Mm Internal Width. On One Side Of The Drawers 20Mm By 60Mm In Section 349Mm Long Fillets Shall Be Provided To Fill The Gap Wher Ewooden Leg Is 55Mm Wide. 25Mm By 25Mm In Section 349Mm Long Teak Wood Fillet Shall Be Provided At The Bottom Side Of 20Mm By 100Mm Fornt Plank Flushing The Bottom Edge With Bottom Of Fillet On Bots Sides Of Drawers. Track Rails Flushing With Top Edge Of Drawer Shall Be Provided On Both Sides Of The Drawers Which Shall Be Of 25Mm By 25Mm In Section And 349Mm Long Having A Rebate Of Of 12Mm By 12Mm In Section For The Guide Rails. Sides Back Of Drawer Shall Be Of 19Mm Thick Teak Wood Plank 60Mm High. Sides Shall Be 349Mm Long And Back Shall Be 324Mm Long. The Bottom Of Drawer Shall Be Of 6Mm Thick Ply Wood Commercial And Provided To Have The Drawer Spaces As 300Mmx300Mmx40Mm. Finish All Wood Surfaces Exposed To View When Placed In Position Shall Be French Polished With High Gloss Finish Preferably Lacquer Finish. Rest As Per Specification And Show In Drawing

  • Location: Phulwari, Bihar

  • Last Date: 15 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657344

GeM Tender
  • Location: Phulwari, Bihar

  • Last Date: 15 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657337

GeM Tender

Ref. No: 52657332

GeM Tender
INDIAN ARMY

Supply Of Chair Writing Steel Overall Size Shall Be 535Mm Long At Front Measured Near Bottom Of Legs. The Width Shall Be 470Mm And Height Shall Be 890Mm. Legs Shall Be Of 19Mm Square Tube Of Mild Steel With Wall Thickness As 1.6Mm. Front Two Legs Shall Be 685Mm High From Bottom Of Legs Up To Bottom Of Wooden Arm Rest. Rear Legs Shall Be 685Mm High From Bottom Of Legs Up To Bottom Of Legs Up To Bottom Of Wooden Arm Rest. The Front And Rear Legs Shall Lbe Joined By Stiffeners Of 19Mm Square Mild Steel Tube Of 1.6Mm Wall Thickness At 685Mm Height (Below The Wooden Arm Rest ) And Another At 420Mm High From Bottom Of Legs. The Front Legs And Rear Shall Be Joined By 19Mm Square Mild Steel Tube Of 1.6Mm Wall Thickness Stiffeners At420Mm High From Bottom Of Legs. 13Mm Square Mild Steel Tube Of Wall Thiuckness 1.6Mm Stiffeners Shall Be Provided At Bottom In Sides And In Front 100Mm High From Bottom Of Legs. Two Small Pieces Of 19Mm Square Mild Steel Tube Of Wall Thickness 1.6Mm Shall Be Welded To The Top Of Rear Legs In Slanging Portion Slanting 10Mm Horizontally In 190Mm Height. The Slanting Pleces Shall Be 180Mm. 12Mm Thick Particle Bd Commercial Shall Be Fixed Over The Slanting Height Of Back Rest. The Back Rest Shall Be 470Mmx180Mm 50Mm Thick 32 Density Synthetic Foam Covered With Leatherised Rexena Shall Be Fixed Irrespective Of What Is Shown On Drawing And Specified In Notes. 60Mmx25Mm In Section 425Mm Teak Wood Arm Rest Shall Be Provided As Shown On Drawing. Hard Rubber Pvc Shoes Shall Be Provided To Bottom Of All Legs. All Steel Surfaces Exposed To View When Placed In Position Shall Be Painted With Two Coats Of Enamel Paint Over A Coat Of Primer After Preparation O Surfaces As Directed By Engineer-In-Chage. Paintiing Shall Be Done With Spray Machine. All Wood Surfaces Exposed To View When Placed In Position Shall Be French Polished With High Gloss Finish.

  • Location: Phulwari, Bihar

  • Last Date: 15 Dec 2025

  • Amount: Ref. Doc.

Ref. No: 52657324

GeM Tender

Ref. No: 52657320

GeM Tender