Active tenders in budgam

supply and fixing of powder coated extruded aluminium supply air grills with aluminium volume control dampersas per specification

supply of providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fiber and natural filler false ceiling tiles of size 595x595 mm of approved texture, design and patterns as per cpwd specification 2019, to be laid in true horizontal level suspended on interlocking metal t grid of hot dipped galvanized iron section of 0.33 mm thick galvanized 120 grams per sqm including both sides)comprising of main t runners of size 24x38 mm of length 3000 mm, cross t of size 24x32 mm of length 1200 mm and secondary intermediate cross t of size 24x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items galvanizing 80 grams per sqm i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and l shape level adjuster of size mm fixed with grid and z cleat of size mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with galvanized iron perimeter wall angle or size mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall s.s screws. the work shall be carried out as per specifications, drawing and as per direction sot the engineer in charge. with 15 mm thick tegular edged light weight calcium silicate false ceiling tiles

removing and re fixing the existing false ceiling at all heights with existing integral densified calcium silicate reinforced with fiber and natural filler false ceiling tiles to be laid in true horizontal level suspended on existing interlocking metal t grid section comprising of main t runners of existing size and length, cross t of existing size and length and secondary intermediate cross t of available size and length to form grid module of size 600 x 600 mm, suspended from ceiling using available galvanized mild steel items i.e. dash fasteners, existing fully threaded hanger rod upto 1000 mm length and l shape level adjuster of size fixed with grid and z cleat of available size with precut hole on both flange to pierce into required size dash fastener if require, fixed with perimeter wall angle to be fixed on periphery wall partition with the help of plugs at existing center to center spacing and dry wall screws. the work shall be carried out as per specifications, drawing and as per directions of the engineer in charge. with existing false ceiling tiles.

supply and fixing of powder coated extruded aluminum return air grills with louvers but without volume control dampers complete as required.

supply of relocation of exhaust fans upto 3000 cfm from existing location and reinstallation to desired location. the installation of fans shall be done using proper hanging arrangement with terminal building truss or concrete roof as per site requirement, with the use of threaded rods, anchor fasteners etc as required, including connection to the ducts through canvas connection. the work shall be carried out with proper safety equipments and as per safety standards at heighted areas.

supply of making of wall openings for duct crossing as per site requirement and cleaning of debris and making good after passing of duct from site and disposing it at suitable location.

supply, installation, testing & commissioning of 6000cfm 20 mmwg direct driven axial fans as per list of approved makes, class f insulation, of suitable diameter, gss casing, aluminum impeller, ip55 protection, ie3 efficiency motor 3 phase 50 hz. the installation of fans shall be done using proper hanging arrangement with terminal building truss or concrete roof as per site requirement, with the use of threaded rods, anchor fasteners etc as required, including connection to the ducts through canvas connection. the work shall be carried out with proper safety equipments and as per safety standards at heighted areas.

supply, installation, balancing and commissioning of fabricated at site gss sheet metal rectangular round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of 0.63mm sheet thickness complete as required including dismantling of existing ducts.

led batten, self ballasted led lamps for general lighting service as per is 16102

electrocardiography (ecg) machine (v2)

supply installation testing and commissioning of prefabricated living shelter 40 men at anantnag high ground

supply installation testing and commissioning of prefabricated living shelter 40 men at gulmarg

supply installation testing and commissioning of prefabricated living shelter 40 men at cbs khrew

supply installation testing and commissioning of prefabricated living shelter 40 men at kitchama

supply installation testing and commissioning of prefabricated living shelter 40 men at panzgam

supply installation testing and commissioning of prefabricated living shelter 40 men at pattan cob

supply installation testing and commissioning of prefabricated living shelter 40 men at gulmarg cob

supply installation testing and commissioning of prefabricated living shelter 40 men at peter iii

supply installation testing and commissioning of prefabricated living shelter 40 men at buna devsar

supply installation testing and commissioning of prefabricated living shelter 40 men at bajwani