Pondicherry (Puducherry)×

Active tenders in Pondicherry (Puducherry)

Civil Work - cpwd Tenders

development of rain water harvesting pond for nit puducherry at karaikal by excavation, formation of earthen embankment of the pond by utitlising part of the excavated earth and transportation and filling of balance earth in layers including rolling, levelling and dressing at composite block site sh: levelling at pond.

Karaikal, Pondicherry (Puducherry)

Refno: 26097471

Last Date: 26 Aug 2022

Amount(Approx): Ref. Doc.

Read More

6 Days left

Power Tenders

transport of store materials upto 10 mt. the rate should be quoted for per m.t. per trip : from the central stores of electricity department, puducherry to karaikal sub-store. from the central stores of electricitydepartment, puducherry to mahe sub-store. from the central stores of electricitydepartment, puducherry to yanam sub-store. transport of store materials above 10 m.t. to 25 m.t. the rate should be quoted for per m.t. per trip. from the central stores of electricity department, puducherry to karaikal sub-stores. from the central stores of electricity department, puducherry to mahe sub-store. from the the central stores of electricity department, puducherry to yanam sub-store. transportation of store materials / g.i. pipes of various sizes / rail poles 42 feet / tubular poles of 7.5 meters and 9.5 meters / 24 feet rcc poles / 30 feet rcc poles . the rate should be quoted for per m.t. per trip from thecentral stores of electricity department, puducherry to karaikal sub-store. from the central stores of electricity department, puducherry to mahe sub-store. from the central stores of electricity department, puducherry to yanam sub-store. transport of store materials upto 10 m.t. , 10 m.t. to 25 m.t. with a return trip to the following regions : the rate should be quoted for per m.t. per trip. from the central stores of electricity department, puducherry with load to karaikal sub-store and return trip with load from thekariakal sub-store to electricity department, puducherry from the central stores of electricity department, puducherry without load to karaikal sub-stores and return trip with load from the karaikal sub-store to electricity department, puducherry from the central stores of electricity department, puducherry with load to karaikal sub-stores and return trip without load from the karaikal sub-store to electricity department, puducherry from the centralstores of electricity department, puducherry with load to mahe sub-store and returntrip with load from the mahe sub-store to electricity department, puducherry from thecentral stores of electricity department, puducherry without load to mahe sub-store and return trip with load from mahe sub-store to electricitydepartment, puducherry from thecentral stores of electricity department, puducherry with laod to mahe sub-store and return trip without load from mahe sub-store to electricity department, puducherry from the central stores of electricity department, puducherry with load to yanam sub-store and return trip with load from the yanam sub-store to electricity department, puducherry from the central stores of electricity department, puducherry without load to yanam sub-store and return trip with load from the yanam sub-store to electricity department, puducherry from the central stores of electricity department, puducherry with load to yanam sub-store and return trip without load from the yanam sub-store to electircity department, puducherry local transport of store materials :- all the materials including g.i. pipes of various sizes /rail poles 42 feet / tubular poles of 7.5 meters and 9.5 meters / 24 feet rcc poles / 30 feet rcc poles within puducherry regin - the rate should be quoted for per m.t. per km. from thecentral stores of electricity department, puducherryh to any of the sub-stations / o & m/ stations of electricity department, puducherry region.

Pondicherry, Pondicherry (Puducherry)

Refno: 26089741

Last Date: 02 Sep 2022

Amount(Approx): 5.00 Lac

Read More

13 Days left

Power Tenders

supply of hrc fuse link 400amps of size 2 subply of hrc fuse link 400amps of size 2 (make of havells / siemens / l & t / indo - asian / c & s / hpl / cooper bussmann / schurter) as per technical specification enclosed. rate should be furnished in the boq form available in e tender portal along with gstin no. mccb 3ph 415v/230v 65amps thermal release 25a-50a ml6 contractor 230v ac (2no+2nc) or equilant

Pondicherry, Pondicherry (Puducherry)

Refno: 26089740

Last Date: 30 Aug 2022

Amount(Approx): 4.85 Lac

Read More

10 Days left

Power Tenders

supply of hrc fuse link 315 amps of size 2 subply of hrc fuse link 315 amps of size 2 (make of havells / siemens / l & t / indo - asian / c & s / hpl / cooper bussmann/schurter) as per technical specification enclosed. rate should be furnished in the boq form available in e tender portal along with gstin no. mccb 3ph 415v/230v 65amps thermal release 25a-50a

Pondicherry, Pondicherry (Puducherry)

Refno: 26089739

Last Date: 30 Aug 2022

Amount(Approx): 4.80 Lac

Read More

10 Days left

Power Tenders

supply of 63a timer contactor with spare no volt coil. supply of 63a timer contactor with spare no volt coil as per the department specification enclosed. the rate should be quoted in the boq format available in e tender portal along with gstin number.

Pondicherry, Pondicherry (Puducherry)

Refno: 26089738

Last Date: 30 Aug 2022

Amount(Approx): 7.08 Lac

Read More

10 Days left

Construction - pwd Tenders

removal of sludge from the septic tank and disposal of the same through the sewage tanker in safe location with an average lead of 10km. the rate to include the cost of labour charge for removing and relaying of cover slab laid over the septic tank, mixing of ferro sulphate into the septic tank, for through mechanical device and disposal of the same including hire charge for sewage tanker etc., complete as directed by the engineer-in-charge. hire charges for engaging front end loader 1cum capacity for clearing the accumulated soild waste and loading to the tipper / tractor, for disposal at the stock yard. the rate shall include the hire charges for machinery, operating staff, fuel charges, lubricants etc., complete as directed by the engineer-in-charge.

Pondicherry, Pondicherry (Puducherry)

Refno: 26089737

Last Date: 25 Aug 2022

Amount(Approx): 5.28 Lac

Read More

5 Days left

Construction - pwd Tenders

earth work in excavation by mechanical means (hydraulic excavation) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil supplying and filling with gravel (excluding rock) in trenches , plinth, sides of foundations etc . in layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and watering etc., complete including all lead and lift supply of quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) centring and shuttering including strutting , propping etc. and removal of form work for - retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. centering and shuttering including strutting , propping etc and removal of form for - suspended floors , roofs , landings , balconies and access platform providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) providing and fixing premoulded bitumen joint filler, for expansion joints including the cost of sealing compound and priming coat - 12 mm wide providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns,piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping,bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. upto floor five level, excluding the cost of centering ,shuttering and finishing - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) reinforced cement concrete work in beams, suspended floors , roofs having slope up to 15degree landings , balconies , shelves , chajjas , lintels , bands , plain window sills , staircases and spiral stair cases upto floor five level excluing the cost of centering ,shuttering, finishing and reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 20mm cement plaster of mix -1:4 (1 cement : 4 fine sand) 15mm cement plaster on rough side of single or half brick wall of mix - 1:4 (1 cement : 4 coarse sand) cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate steel reinforcement for r.c.c.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - thermo -mechanically treated bars (isi brand of approved make) fe - 415 or more

Puducherry, Pondicherry (Puducherry)

Refno: 26089736

Last Date: 25 Aug 2022

Amount(Approx): 13.83 Lac

Read More

5 Days left

Construction - pwd Tenders

earthwork in excavation of foundation of structure as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work - by mechanical means - depth upto 3m (ordinary soil) supplying and filling with quary rubbish including spreading watering and consolidation etc., complete. cement concrete 1:4:8 mix with stone aggregate 40mm nominal size in foundation upto a depth of 1.5 metres below ground level and upto height of 1.5 above ground/bed level. plain cement concrete m-15 mix with stone aggregates 20mm nominal size mechanically mixed and vibrated in foundation upto a depth of 1.50 metres below ground level and/or 1.50 metres above ground/bed level. cement concrete 1:3:6 mix with stone aggregates 20mm nominal size mechanically mixed and vibrated in foundation upto a depth of 1.5 metres below ground level and 1.5 metres ground/bed level. centring and shuttering including strutting , propping etc. and removal of form work for - foundations, footings, bases for columns 12mm cement plaster finished with a floating coat of neat cement of mix - 1:4 (1 cement :4 fine sand) steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works desilting the canal by removing silt, slush and debries from the bed of the drain removing the grass , buses etc., complete in unhygenic and foul condition including disposal of the same within an average lead of 1km without polluting the environment by manual means painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - two or more coats on new work

Pondicherry, Pondicherry (Puducherry)

Refno: 26089735

Last Date: 25 Aug 2022

Amount(Approx): 8.95 Lac

Read More

5 Days left

Construction - pwd Tenders

supplying and filling with red earth (excluding rock) conveyance to the work site and stacking to the departmental gauge, spreading in layers not exceeding 20cm in depth, watering and consolidation using 0.5 tonne roller, or wooden or steel rammers etc. complete for making play fields, running tracks and court yards. the rate excludes the cost of red earth which is supplied by the department @ free of cost (msme, pillaichavady). the rate includes all taxes. providing and laying soft korean grass turfing including supplying red earth, manure, river sand, labour charges for ground preparation spreading earth and manure transportation of all and maintaining the lawn for initial three months etc. complete. uprooting rank vegetation and weeds by digging the area to a depth of 60 cm , removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growts after 10 to 15 days and then fine dressing for planting new grass , including disposal of all rubbish with all leads and lifts making lawn with shade grass zig zac planting method including supplyiing red soil, well decayed from yard manure, river sand, labour charges for ground preparation spreading earth and manure, transportation of all and maintaining the lawn for initial three months etc. complete as directed by the engineer-in-charge. providing and planting dates palms 7 to 8 feet height including 1m dia holes 1m deep dug in the gound, mixing the soil with decayed farmyard manure, planting the tree, backfilling the trench watering and maintaining the tree for three months. providing and planting fuscaria. providing and planting ficus star light medium size 3 feet height. providing and planting the following plants including maintenance period for initial 3 (three) month including preparation of soil, weathering forking for group application of manure, watering during maintenance period with necessary manure, pesticides etc, complete as directed by the engineer-in-charge. (c) flowering plants (alamenda, taperna, techoma) and the like of minimum height 1.5 feet. supplying, plainting and maitaining clirodendroon/golden duranta of height of 1 feet border plants around this site including cost of materials, red soil, well decayed form yard manure, river sand and all labour charges for ground preparation manuring and maintaining for initial 2 months etc. complete as directed by the engineer-in-charge. earthwork in excavation of foundation of structure as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remainging earth locally for road work - by mechanical means - depth upto 3m ordinary soil) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) brick work with common burnt clay f.p.s. (non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand) 12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand) 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand ) re- raised band finishing walls with acrylic smooth exterior paint of required shade - new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm engaging of excavator 60 for cleaning the entire u drain on both sides during day time hours. the rate includes all cost for hire charges, fuel charges, driver salary etc. as directed by the engineer-in-charge.

Pondicherry, Pondicherry (Puducherry)

Refno: 26089734

Last Date: 25 Aug 2022

Amount(Approx): 10.25 Lac

Read More

5 Days left

Construction - pwd Tenders

demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) earthwork in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m - all kinds of soil supply of quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness centring and shuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns cement concrete 1:4:8 mix with stone aggregate 40mm nominal size in foundation upto a depth of 1.5 metres below ground level and upto height of 1.5 above ground/bed level. cement concrete 1:3:6 mix with stone aggregates 20mm nominal size mechanically mixed and vibrated in foundation upto a depth of 1.5 metres below ground level and 1.5 metres ground/bed level. cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate cement plaster 12mm thick in cement mortar 1:3 providing , hoisting and fixing upto floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span upto floor five level, including the cost of required centering, shuttering but excluding the cost of reinforcement , with 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) steel reinforcement for r.c.c. works including bending, binding and placing in position - thermo mechanical treated bars (isi brand approved make) fe - 415 or more filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m steel work welded in built up sections / framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Puducherry, Pondicherry (Puducherry)

Refno: 26089733

Last Date: 25 Aug 2022

Amount(Approx): 47.88 Lac

Read More

5 Days left

Construction - pwd Tenders

dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead - of area 3 sqm and below demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10mm to 25mm demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete 20mm cement plaster of mix -1:4 (1 cement: 4 fine sand) painting top of roofs with bitumen of approved quality @ 17kg per 10 sq.m impregnated with a coat of coarse sand at 60cudm per 10 sq.m including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete - with residual type petroleum bitumen of grade vg-10 lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50 lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with parapet wall complete providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2 integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -vengai wood providing and fixing isi marked flush door shutters conforming to is : 2202 (part 1) non - decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 25 mm thick (for cupboard) including isi marked nickel plated bright finished m.s.piano hinges with necessary screws providing and fixing factory made upvc white colour sliding glazed window upto 1.50m in height dimension comprising of upvc multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i. fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shyall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc.after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(single / double glass panes, wire mesh and silicon sealent shall be paid separately) - two track two panels sliding window made of (bigl series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(area of window upto 1.75 sqm upto 2.50 sqm) - sliding window size 1.50x1.35 m steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works providing and fixing aluminium sliding door bolts , isi marked , anodised ( anodic coating not less than grade ac 10 as per is: 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 300 x 16 mm providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is :1868), transparent or dyed to required colour or shade, with necessary screws etc. complete - 250 x10 mm providing and fixing aluminium handles, isi marked , anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade,with necessary screws etc, complete - 125 mm providing and fixing facory made door frame (single rebate ) made out of single piece extruded solid pvc foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & pvc solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturers specification providing and fixing factory made 30 mm thick door shutter made of solid pvc foam profile . the styles & rails shall be of size 75 mm x 30 mm having wall thickness 5mm . the styles, top & bottom rails shall have one side wall thickness of 15 mm integarally extruded on the hinge side of the profile for better screw holding power. the styles and rails shall be reinforced with m.s. tubes of size 33 mm x 17 mm x 1mm, painted with primer, all four corners of reinforcement to be welded or sealed. solid pvc extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to recive single piece extruted 5 mm pvc sheet as panel. the styles and rails will be mitred cut and joint with the help of pvc solvent cement & self driven self tapping screws. single piece extruded solid pvc lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of pvc solvent cement and self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturers specifications - non decorative finish providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make (nitco / kajaria) in colours such as white, ivory, grey, fume red brown ,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc., complete providing and fixing commercial quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make (jhonson /asian / somany / nitco) in all colours, shades of size 300 x 450 mm as approved in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete - size 300x450 mm providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) providing and laying fully vitrified floor tiles of size 600 x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to is : 15622 of approved make (nitco / rak / johnson /asian ) in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete - size of tile 600 x600 mm earth work in excavation by mechanical means (hydraulic excavation) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) brick work with common burnt clay f.p.s. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand) brick work with common burnt clay f.p.s (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand) 15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand) providing and laying 22 mm thick factory made pre-polished cement concrete flooring tiles of required colour and design over 20 mm thick cement mortar 1:4 (1 cement : 4 sand ) and jointed with cement slurry mixed with an admixture of pigment to match the shade of the tile - (endura ultra dazzle technic) demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade - old work (two or more coats applied @ 1.43 ltr / 10 sqm) over existing cement paint surface finishing walls with acrylic smooth exterior paint of required shade - new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - two or more coats on new work supplying and filling with gravel (excluding rock) in trenches, plinth, sides of foundations etc . in layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and watering etc .complete including all lead and lift providing, hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) steel reinforcement for r.c.c.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level - thermo -mechanically treated bars (isi brand of approved make) fe - 415 or more providing and fixing white vitreous china water closet squatting pan (indian type) - orissa pattern w.c.pan of size 580x440mm providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid,10 litre low level white vitreous china flushing cistern & c.p.flush bend with fittings & c.i. brackets, 40 mm flush bend , overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required - w.c.pan with isi marked white solid plastic seat and lid providing and fixing on wall / column face unplasticed - pvc soil and waste pipes (type - b) conforming to is : 13592- 1992 including jointing with seal ring conformation to is : 5382 leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre providing and fixing on wall face / column face unplasticised - pvc mould fittings / accessories for unplasticisd - pvc soil and waste pipes conforming to is : 14735 - 1999 including jointing with seal ring conforming to is : 5382 leaving 10mm gap for thermal expansion - bend 110 mm providing and fixing on wall face / column face unplasticised - pvc moulded fittings / accessories for unplasticisd - pvc soil and waste pipes conforming to is:14735 - 1999 including jointing with seal ring conforming to is :5382 leaving 10mm gap for thermal expansion - single tee without door - 110 x110x110mm providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings. this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete - external work - 20mm nominal outer dia pipes providing and fixing astm pipes including all astm plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . this includes jointing of pipes & fitting with one step astm solvent cement and testing of joints complete (internal work exposed on wall ) - 25mm nominal outer dia pipes providing and fixing astm pipes including all astm plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . this includes jointing of pipes & fitting with one step astm solvent cement and testing of joints complete (internal work exposed on wall ) - 20mm nominal outer dia pipes providing and fixing c.p.brass bib cock of approved quality conforming to is: 8931 - 15 mm nominal bore providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 20mm nominal bore providing and fixing gun metal gate valve with c.i.wheel of approved quality (screwed end) - 25mm nominal bore providing and fixing gun metal gate valve with c.i.wheel of approved quality (screwed end) - 20 mm nominal bore providing and placing on terrace (at all floor levels) polyethylene water storage tank isi: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - circular tank providing and fixing wash basin with c.i. brackets, 15mm c.p. brass pillar taps, 32mm c.p.brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required - white vitreous china flat back wash basin size 550x400 mm with single 15mm c.p. brass pillar tap providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is: 8931- 15 mm nominal bore supplying fixing and commisioning of suguna/ texmo / sharp 0.5 hp monoblock pumpset slow speed single phase motor. the rate include the cost of pumpset, pumpset fixing in position and test run etc.complete providing and fixing p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete - semi rigid pipe - 32mm dia providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is:733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p.brass / stainless steel screws, all complete as per architectural drawings (glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - anodised aluminium (anodised transparent or dyed to required shade according to is:1868, minimum anodic coating of grade ac 15) providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is:733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , c.p.brass / stainless steel screws , all complete as per architectural drawings (glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - powder coated aluminium (minimum thickness of powder coating 50 micron) providing and fixing anodised aluminium sections of ac grade 15 for fixing the grills for the doors / windows / ventilators etc., with necessary cp brass screws providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is:12823 grade i type ii, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings- pre - laminated particle board with decorative lamination on both sides providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of5.50 mm thickness filling the gap in between aluminium frame & adjacent rcc / brick / stone work by providing weather silicon sealent over backer rod of approved quality as per architectural drawings complete - upto 5 mm depth and 5 mm width providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is :3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ), with necessary accessories and screws etc complete providing and fixing isi marked aluminium butt hinges anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 100 x 63 x 3.2 mm providing and fixing bright finished brass 100 mm mortice latch and lock, isi marked, with six levers and a pair of anodised (anodic coating not less than grade ac 10 as per is : 1868 ) aluminium lever handles of approved quality with necessary screws etc complete providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding. buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complte. i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab withsuitable arrangement (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.,)

Pondicherry, Pondicherry (Puducherry)

Refno: 26089732

Last Date: 25 Aug 2022

Amount(Approx): 15.45 Lac

Read More

5 Days left

Construction - pwd Tenders

earth work in excavation by mechanical means (hydraulic excavation) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finsishing and reinforcement all work upto plinth level 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and sting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering , shuttering, finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) centering and shuttering including strutting, propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete centering and shuttering including strutting, propping etc and removal of form for - suspended floors, roofs, landings, balconies and access platform centering and shuttering including strutting, propping etc and removal of form for - columns, pillars, piers, abutments, posts and struts steel reinforcement for r.c.c.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level - thermo -mechanically treated bars (tiscon / vizag/ iisco / sail / jsw) fe - 415 or more brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand) half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundations and plinth in - cement mortar 1:4 (1 cement :4 coarse sand) providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -padak wood providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including isi marked m.s.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - padak wood - 35 mm thick shutters providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - padak wood providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30 x10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) providing and fixing isi marked aluminium butt hinges anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 125 x 75 x 4 mm providing and fixing isi marked aluminium butt hinges anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 125 x 63 x 4 mm providing and fixing aluminium sliding door bolts , isi marked , anodised ( anodic coating not less than grade ac 10 as per is: 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 300 x 16 mm providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is :1868), transparent or dyed to required colour or shade, with necessary screws etc. complete - 300 x10 mm providing and fixing aluminium handles, isi marked , anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade,with necessary screws etc, complete - 125 mm providing and fixing aluminium hanging floor door stopper , isi marked , anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc complete - twin rubber stopper providing and fixing bright finished brass 100 mm mortice latch and lock, isi marked, with six levers and a pair of anodised (anodic coating not less than grade ac 10 as per is : 1868 ) aluminium lever handles of approved quality with necessary screws etc complete providing and fixing factory made upvc door frame made of upvc extruded sections having an overall dimension as below (tolerance + 1mm ), with wall thickness 2.0 mm (+-0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws , joints mitred and plastic welded. the hinge side vertical of the frames reinforced by galvanized m.s.tube of size 19 x 19 mm and 1mm (+-0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification - extruded section profile size 48 x 40 mm providing and fixing to existing door frames - 30 mm thick factory made polyvinyl chloride (pvc) door shutters made of styles and rails of a upvc hollow section of size 60 x 30 mm and wall thickness 2 mm (+- 0.2 mm) with inbuilt decorative moulding edging on one side . the styles and rails mitred and joint at the corners by means of m.s. galvanised / plastic brackets of size 75 x 220 mm having wall thickness 1.0 mm and stainless steel screws . the styles of the shutter reinforced by inserting galvanised m.s.tube of size 25x20 mm and 1mm (+- 0.1mm) wall thickness . the lock rail made up of h section , a upvc hollow section of size 100 x 30 mm and 2 mm (+-0.2 mm) wall thickness , fixed to the shutter styles by means of plastic / galvanised m.s. u cleats. the shutter frame filled with a upvc multichambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm (+ 0.1mm) wall thickness . they panels filled vertcally and tie bar at two places by inserting horizontally 6 mm galvanised m.s.rod and fastened with nuts and washers, complete as per manufacturers specification providing and fixing of 65 mm godrej navatal lock of 7 levers with 3 keys etc complete providing and fixing factory made upvc white colour sliding glazed window upto 1.50m in height dimension comprising of upvc multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i. fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shyall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc.after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing.(single / double glass panes, wire mesh and silicon sealent shall be paid separately) - two track two panels sliding window made of (bigl series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(area of window upto 1.75 sqm upto 2.50 sqm) - sliding window size 1.50x1.35 m steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate providing and fixing commercial quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer) , of approved make (jhonson / asian / somany / nitco) in all colours, shades of size 200 x 300 mm as approved in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete - size 200x300 mm providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make (nitco / kajaria) in colours such as white, ivory, grey, fume red brown ,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc., complete providing and laying rectified ceramic rustic / matt finish floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer) of commercial quality conforming to is:15622 of approved make (somany / nitco) in all colours shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete painting top of roofs with bitumen of approved quality @ 17kg per 10 sq.m impregnated with a coat of coarse sand at 60cudm per 10 sq.m including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete - with residual type petroleum bitumen of grade vg-10 providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2 integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50 lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with parapet wall complete providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a, including jointing with seal ring conforming to is: 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes - 110 mm diameter providing and fixing on wall face unplasticised - pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592 type a, including jointing with seal ring conforming to is: 5382, leaving 10mm gap for thermal expansion - single tee without door -110x110x110mm providing and fixing on wall face unplasticised - pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592 type a, including jointing with seal ring conforming to is: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe providing and fixing unplasticised - pvc pipe clips of approved design to unplasticised- pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with m.s. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm 15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand) 12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand) 15 mm cement plaster on rough side of single or halfbrick wall finished with a floating coat of neat cement of mix - 1:4 (1 cement : 4 fine sand) finishing walls with textured exterior paint of required shade - new work (two or more coats applied @ 3.28 ltr / 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4 fine sand) white washing with lime to give an even shade - old work (two or more coats) removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete finishing walls with textured exterior paint of required shade - old work (two or more coats on existing cement paint surface applied at 3.28 ltr / 10 sqm demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead - of area 3 sqm and below dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10mm to 25mm supplying fixing and commisioning of suguna/ texmo / sharp 1 hp monoblock pumpset slow speed single phase motor. the rate include the cost of pumpset , pumpset fixing in position and test run etc.complete providing and fixing white vitreous china pedestal type water closet (european type w.c.pan) with seat and lid, 10 litre low level white p.v.c. flusing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is: 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - w.c. pan with isi marked black solid plastic seat and lid providing and fixing wash basin with c.i. brackets, 15mm c.p. brass pillar taps,32 mm c.p.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required - white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p.brass pillar taps providing and fixing p.v.c.low level flushing cistern with manually controlled device (handle lever) conforming to is:7231, with all fittings and fixtures complete - 10 litre capacity -white providing and fixing p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete - flexiple pipe - 40mm dia providing and fixing astm pipes including all astm plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . this includes jointing of pipes & fitting with one step astm solvent cement and testing of joints complete (internal work exposed on wall ) - 20mm nominal outer dia pipes providing and fixing astm pipes including all astm plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . this includes jointing of pipes & fitting with one step astm solvent cement and testing of joints complete (internal work exposed on wall ) - 32mm nominal outer dia pipes providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 20mm nominal bore providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 25mm nominal bore providing and placing on terrace (at all floor levels) polyethylene water storage tank isi: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - circular tank providing and fixing c.p.brass bib cock of approved quality conforming to is: 8931 - 15 mm nominal bore providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms - 15mm nominal bore providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is: 8931- 15 mm nominal bore making soak pit 2.5 m diameter 3 m deep with 45 x 45 cm dry brick honeycomb shaft with bricks of class designation 75 and 110mm dia upvc pipe (type b) 1.8 m long complete as per stadard design with f.p.s.bricks providing and fixing on wall face / column face unplasticised - pvc moulded fittings / accessories for unplasticisd - pvc soil and waste pipes conforming to is:14735 - 1999 including jointing with seal ring conforming to is :5382 leaving 10mm gap for thermal expansion - single tee without door - 110 x110x110mm supply of quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness providing, laying and jointing upvc pipes(finolex / jain / supreme / truebore / nandi) (0.6 mpa)conforming to is specification 4985 and isi marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement, excluding upvc specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per is and cpwd specification. - 110mm dia.

Pondicherry, Pondicherry (Puducherry)

Refno: 26089730

Last Date: 25 Aug 2022

Amount(Approx): 10.83 Lac

Read More

5 Days left

Construction - pwd Tenders

cleaning of the existing black topped surfaces with brooms, soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. as per clause no 503.3.1 of most specification. providing and applying tackcoat on the prepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on black topped surface bitumen @ 5kg/10sqm. providing, laying and rolling of built-up spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. key stone chips spreader may be used with application of bituminous binder after each layer and with key aggregates placed on top of the second layer to serve as a base conforming to the line, grades and cross-section specified, the compacted layer thickness being 75mm. (as per morth specification, 4th revision) providing and laying open graded premix carpet of 25mm thick on prepared surface in a single course as wearing course composed of specified size of stone aggregates premix with a bituminous binder in mini hot mix plant 6-10 tonne laying manually and rolling with power roller 8-10 tonne but excluding cost of primer/tack coat. as per clause no 509 of most specification. providing and applying liquid seal coat, type a comprising of a layer of bituminous binder, followed by a cover of stone chipping of specified grading and rolling with power roller 8 to 10 tonne. as per clause no 513 of most specification. hire charge for back hoe loader (jcb)

Pondicherry, Pondicherry (Puducherry)

Refno: 26089729

Last Date: 25 Aug 2022

Amount(Approx): 9.41 Lac

Read More

5 Days left

Construction - pwd Tenders

demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead nominal concrete 1:4:8 or leaner mix (including equivalent design mix) earthwork in excavation of foundation of structure as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work - by mechanical means - depth upto 3m (ordinary soil) supply of quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness cement concrete 1:4:8 mix with stone aggregate 40mm nominal size in foundation upto a depth of 1.5 metres below ground level and upto height of 1.5 above ground/bed level. centring and shuttering including strutting , propping etc. and removal of form work for - foundations, footings, bases for columns cement concrete 1:3:6 mix with stone aggregates 20mm nominal size mechanically mixed and vibrated in foundation upto a depth of 1.5 metres below ground level and 1.5 metres ground/bed level. plain cement concrete m-15 mix with stone aggregates 20mm nominal size mechanically mixed and vibrated in foundation upto a depth of 1.50 metres below ground level and/or 1.50 metres above ground/bed level. 12mm cement plaster finished with a floating coat of neat cement of mix - 1:4 (1 cement :4 fine sand) providing , hoisting and fixing upto floor five level precast reinforced cement concrete in lintels, beams, and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse sand) , cost of required centering and shuttering but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) steel reinforcement for r.c.c. works including bending, binding and placing in position - thermo mechanical treated bars (isi brand approved make) fe - 415 or more

Puducherry, Pondicherry (Puducherry)

Refno: 26089728

Last Date: 25 Aug 2022

Amount(Approx): 13.23 Lac

Read More

5 Days left

Health Services And Equipments - dhfw Tenders

flexible reamer set (q3)

Pondicherry, Pondicherry (Puducherry)

Refno: 26085365

Last Date: 25 Aug 2022

Amount(Approx): Ref. Doc.

Read More

5 Days left

Health Services And Equipments - dhfw Tenders

broken screw removal set (q3)

Pondicherry, Pondicherry (Puducherry)

Refno: 26085360

Last Date: 25 Aug 2022

Amount(Approx): Ref. Doc.

Read More

5 Days left

Health Services And Equipments - dhfw Tenders

high end kinetic energy system for advanced therapeuticendoscopy (q3)

Pondicherry, Pondicherry (Puducherry)

Refno: 26085353

Last Date: 26 Aug 2022

Amount(Approx): Ref. Doc.

Read More

6 Days left

Education And Research Institutes - iit Tenders

split air conditioner including green ac - (version 2.0) (q2)

Pondicherry, Pondicherry (Puducherry)

Refno: 26085197

Last Date: 29 Aug 2022

Amount(Approx): Ref. Doc.

Read More

9 Days left

Education And Research Institutes - iit Tenders

split air conditioner including green ac - (version 2.0) (q2)

Pondicherry, Pondicherry (Puducherry)

Refno: 26085155

Last Date: 30 Aug 2022

Amount(Approx): Ref. Doc.

Read More

10 Days left

Railway Transport - ner Tenders

buy back - stationary value regulated lead acid batteries(q3)

Pondicherry, Pondicherry (Puducherry)

Refno: 26085061

Last Date: 05 Sep 2022

Amount(Approx): Ref. Doc.

Read More

16 Days left

INDIAN TENDER INFORMATION

Get All The Latest All Tender/Project/Result Information From Across India. Search Road Tenders Tenders From Live And Archive Business Category. All Tenders Are Updated On Daily Basis On Our Website. Get All The Latest All Tender/Project/Result Information From Across India. Search Road Tenders Tenders From Live And Archive Business Category. All Tenders Are Updated On Daily Basis On Our Website. Get All The Latest All Tender/Project/Result Information From Across India. Search Road Tenders Tenders From Live And Archive Business Category. All Tenders Are Updated On Daily Basis On Our Website. Get All The Latest All Tender/Project/Result Information From Across India. Search Road Tenders Tenders From Live And Archive Business Category. All Tenders Are Updated On Daily Basis On Our Website.

TENDER BY LOCATIONS