ward 19 diff works- 1 earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m 2 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level code) 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size). 3 random rubble masonry with hard stone in foundation and plinth : cement mortar 1:6 (1 cement : 6 coarse sand) 4 providing and laying structural plain/ reinforced cement concrete (design mix) of specified grade in substructure at all levels using concrete mixer and vibrater, including cost of form work, as per drawing and technical specifications complete as per clause 1500, 1700 and 2200 of mort andh specification including all material, labour, scaffolding etc. rcc grade m -20 5 centring and shuttering upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete. 6 reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete. mild steel and medium tensile steel bars. 7 brick masonry in foundation and plinth with bricks of class designation 75 in : cement mortar 1 : 4 (1 cement : 4 coarse sand) add extra for brick work in super structure upto third storey 8 brick work in partition in super structure upto five storey 7cm. thick (brick on edges) using bricks of class designation 75 in : cement mortar 1 : 4 (1 cement : 4 coarse sand) 9 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvs/neoprene gasket etc complete as per the architectural drawing and the direction of engineer in charge with glass panes of 5 mm thickness 10 sandf fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by aluminium beading 20x3mm with suitable screws at not exceeding 150mm distance at all heights with all lead and lift with scafolding. 11 providing and fixing brass locks without handle for aluminium door of approved quality make and design as directed by engineer-in-charge 12 providing and fixing vitrified polished tiles on floor, skirting and steps etc in different sizes with water absortion less than 0.08 and conforming to is 15622 of approved make in all colour and shade , laid with 20 mm thick cm 1;4 including the jints 13 polished blue kota stone flooring skirting , laid over 20mm thick base of cm1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete: for upto 900 sqcm (a) 25 mm thick slab 14 cement concrete grade 1:2:4 rounding off edges etc. but excluding the cost of nosing of steps etc complete. 40mm thick with 20mm thick nominal size aggregate.75 mm thick with 20 mm thick nominal size 15 precast terrazo tiles of approved make 20mm thick with marble chips of size upto 6mm laid in floors and landing jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 30mm thick bed 16 stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, ralthal, stone kharanja, lime terracing 90 mm average thickness (as per jaipur 17 providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm 18 providing and fixing m.s. sheet single leaf door shutter in angle iron frame 35*35*5mm suitability diagonally braced with 25*3mm flat iron above and below lock rail of size 50*5mm beading extra including all fitting , as per direction of engg. in charge 19 pandf granite stone slab mirror polished and machine edge cut in walls, pillars, steps shades and sills , floors etc. laid on 12mm av. th. base of cm 1:3 jointing with white cm 1:2 with pigment to match the shade of granite slab complete i/c rubbing and polishing 20 plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished: 20mm thick. 21 applying one coat of primer of approved brand and manufacture on wall surface including all scaffolding (new surface) cement primer (on new surface) 22 applying birla/jk white cement based putty over cement plaster surface for making even surface 23 providing and fixing in position collapsible steel shutters with vertical m.s. channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of t-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete 24 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 25 painting with enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work 26 s and f steel railing of steel grade 202 made of top side of 50mm diameter of 18 gauge and three pipes of 19mm diameter of 18gauge and verical pipes of 50mm diameter of 18 gauge 1200mm c/c complete glossy finish 27 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is: 13753 and is:15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat 28 p and f bib cock (is : 8931 mark), superior quality of approved make: brass 400 grm, 15mm nominal bore. 29 p and f wvc wash basin (1st quality, is: 2556 mark) of approved make with c.i brackets duly painted, 1 no.15 mm c.p. pillar cock (is: 8934 mark) and 32mm c.p. brass waste coupling of approved make, 25 mm g.i. waste pipe complete including cutting and making good 30 p and f high level flushing cistern of 10 litres capacity of approved make including c.i. brackets duly painted, chain and pull and 32 mm dia g.i. concealed flush pipe with m.s. clamps, 20 mm dia g.i. overflow pipe upto 185 cm. long, brass ball cock (is :1703 31 p and f european type white glazed vitreous china ist quality double syphonic w.c. o (is:2556 mark) with p or s trap including cutting and making good the wall and floor : 32 pandf rigid pvc pipe fittings (is: 4985 mark) class ii/(4 kg./cm2) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 110mm dia 33 75mm dia 34 providing laying and jointing glazed s.w. pipes grade a (is:651 marked) of approved make with spun yarn and stiff mixture of cement mortar 1:1, excavation and refilling of earth in all types of soil upto 1.2m depth, s.w. fittings, including testing of joints 35 p and f g.i. pipes (internal work) with g.i. fittings excluding union (is:1239 mark) and ms clamps including cutting and making good the walls and floors: exposed on wall 15 mm dia nominal bore a class 36 25 mm dia nominal bore a class 37 pandf rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:bend 45 110 mm dia 38 75 mm dia 39 pvc clip 110 mm dia 40 75 mm dia 41 coupler(socket) 110 mm dia 42 75 mm dia 43 reducer 110 x 75 mm 110 mm dia 44 75 mm dia 45 p andf bevelled edge mirror of special glass of approved make (atul, modi guard, saint gobin or equivalent) complete with 6mm thick asbestos cement sheet ground fixed to wooden screws and washers size 600 x 450 mm x 4 mm thick 46 p andf towel rail or ring of approved quality/ make:c.p. brass towel rail elbow type with concealed screws size 450 mm (heavy duty) 47 p and f lst quality wvc urinal (is:2556 mark) with 25mm dia g.i. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. mini stall size 455 x 385 x 350mm 48 p and f pvc storage tank (is:12701 marked indicating the bis license no.) of approved make with cover, 25 mm dia 1 m long g.i. over-flow pipe and 25 cm. long wash out pipe with plug and socket, including making connection etc. complete of approved design. 500 litre 49 wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1 short point (up to 3 mtr.) 50 medium point (up to 6 mtr.) 51 long point (up to 10 mtr..) 52 pandf 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections with lugs, testing etc. as req 6 a to 32 a rating 53 40a to 63 a rating 54 providing and fixing of heavy duty capacitor start, double ball bearing 900/1400 rpm single phase isi marked exhaust fan is : 2312 marked in existing opening including making connections testing etc. as required 300 mm sweep (900/1400 rpm) 55 p/laying p.v.c. / xlpe insulated and p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor of is:1554 p-i / is :7098 p - i of group 1 of approved make in ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick under laye 2.5 sqmm x 2 core 56 2.5 sqmm x 3 core 57 sandf following sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. group-ist 25 mm 58 p and f fluorscent tube rod in existing fixtures as required. minimum 3 star rating group-ist 36/40 watts 59 p and f box type fluorescent tube fitting fabricated from crca sheet and finished with powder coating / stove enamelled paint complete with accessories like (occb, starter, starter seat)/ eb, condensor, rotor holder, terminal block duly prewired with copper 60 p and f 18 swg m.s.recessed fan bo haxagonal/round of size 130 mm dia , depth 75mm 12 mm dia rod fan hook with 100 mm length extended on each side group-ist 61 p and f star rated double ball bearing capacitor start , aluminium body and blade ceiling fan with down rod up to 30 cm with 3 x3=1.50 sq mm pvc insulated flexible copper conductor making connection testing etc. as required 1200 mm sweep 5 star rated group-ist 62 earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m s 63 carriage of materials bymechanical transport including loading,unloading and stacking :: earth for 1 km 64 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level code) 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size). 65 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - all work upto plinth level 1:1:3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal 66 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. red sand 67 reinforced ferro-cement drain covers designed for a class loading of size 1000 x 800 mm 68 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
