Active tenders in Bellow

gas lighter

auction sale of lot no: bmtc-113 lot name: scrapped air bellows with or w/o plate

auction sale of lot no: bmtc-68 lot name: scrapped rubber including air bellows with or w/o plate, rubber pipes, etc

supply of 1 lv7/tata 2154-3010-0107 assy pull cable (accel) nos 99 2. lv7/tata 2786-1833-9902 cartridge lub oil filter nos 110 3. lv7/tata 6212-3050-105 fuse link 8 nos 173 4. lv7/tmb 2060-2670-6301 rubber bellow nos 11 5. lv7/tmb 2530-004674 rep kit(for wheel cyl) nos 59 6. lv7/tmb 6212-052-0038 bulb d12/3-21/5 wts 2920 nos 273 7. lv7/hh 2920005473(98056- 57738-00) plug spark nos 26 8. lv7/hh 6240013709(34906- gk8-700) bulb tail light (12v 10/5w) nos 36

supply of metal expansion bellows.

tender for leather bellow as per drawing number wr/mx/el-2014 3poh -tmc -001 item no.1.2&3 as per drg. no. wr/mx/el- 2014 /3-poh-tmc-001 .

supply and fitment bellow for loco cleaning blower size werth 50mm hight 1 mtr. thickness30mm with backlite site back and front.as per drg.no.tata/rs/v/196/325 .

tender for set of single duct leather bellows comperising type-i qty 02 nos. & type-iiqty 04 nos. (02 items 06 nos.to rdso drg. no. skel-4893 alt-1 or latest & rdso specificationno. spec/e-7/06 rev-2 of july 2002.

enquiry for procurement of bearing below 80 mm for chp-210mw.

tender for ring plate for fixing of horn switch handle bellow for wag-7 locomotives as per drg. no.b/trs/g7/pn.eqpt/4/13 ref nos. 02.

tender for leather bellow with mounting arrangement and hardware in a set. catno-s/9/0062.

supply of 1 erw steel pipe dn 150mm, 2 erw steel pipe dn 75 mm, 3 butterfly valve dn 200 4 gate valve dn 200 5 butterfly valve dn 150 6 gate valve valve dn 150 , pn-20 bar 7 butterfly valve dn 75 8 gate valve dn 75 9 carbon steel 45 degree elbow dn 150mm, 10 carbon steel 45 degree elbow dn 200mm, 11 carbon steel 90 degree elbow dn 200mm, 12 carbon steel 90 degree elbow dn 150mm, 13 carbon steel flange dn 75mm 14 carbon steel flange dn 150mm 15 carbon steel flange dn 200mm 16 rubber bellow 75 mm 17 rubber bellow 150 mm 18 rubber bellow 200 mm 19 gasket 75 mm 20 gasket 150 mm 21 gasket 200 mm 22 c.s t joint 150 x 150 x 150 23 c.s t joint 200 x 200 x 200 24 c.s reducer 200 x 150 25 c.s reducer 200 x 100 26 c.s reducer 150 x 40 27 c.s reducer 150 x 20 28 c.s reducer 150 x 75 29 c.s reducer 200x 125 30 ht bolt m20x 100mm 31 ht bolt m16 x 75 mm 32 ht bolt m 8 x 40 mm 33 ht washer id 20mm 34 ht washer id 16mm 35 ht washer id 8mm 36 ht nut m20, grade 8.8 37 ht nut m16, grade 8.8 38 ht nut m8, grade 8.8

supply of roof mounted ac package unit (rmpu) type-i for lhb eog coaches in coach set,consisting of rmpu with r407c refrigerant-02 nos. to the rdso specification no. rdso/pe/spec/ac/0061-2005 rev. 1 and microprocessor controller unit-01 no. as per rdso specification no.rdso/pe/spec/ac/0139-2009 rev. 1, type # 1 complete with accessories as per scope of supply asenvisaged in the rdso specification with supply of bellows set consisting of 01 no. supply air bellow, 02 nosfresh air bellows & 02 nos. return air bellows ducts made of meta aramid / para aramid fabric with siliconrubber coating on both sides for lhb eog/hog type ac coaches as per rdso specification no.rdso/pe/spec/ac/0197-2020. scope of supply as per clause no. 2 of the above specification note- scope ofsupply for lhb ac variant coach is 02 nos. of rmpu units with 01 no. microprocessor unit and sensorsprocure from railway approved sources only.

tender for bellow frame - aob model no. 3-1200-325-hcj of make : tinius olsen .

tender for set of different types of rubber hoses for mr-300 series ac rakes ofkolkata metro. each set consists of the following items. 1]3/8 id hose as per en853-1sn for piston valve as per drg.no.mr/poh-3-5-0119 alt-a or latest, if any (item no.1)with connector/nipple as per drg. no. mr/poh-3-5-0120 -16no. 2) 1/4 id hose (b16) as peren853-1sn for service & parking brake (bogie to body) as per drg.no.mr/poh-3-5-0119alt-a or latest, if any (item no.2) with connector/nipple as per drg.no.mr/poh-3-5-0120 -16no. 3) 1/2 id hose (c04) as per en854-2te for service brake tbu as per drg.no.mr/poh-3-5-0119 alt-a or latest, if any (item no.3) with connector/nipple as per drg.no.mr/poh-3-5-0122 alt-a or latest- 64no. 4]1/2 id hose as per en853-1sn for 20ltrs reservoir & airbellow as per drg.no.mr/poh-3-5-0119 alt-a or latest, if any (item no.4) withconnector/nipple as per drg.no.mr/poh-3-5-0122 alt-a or latest-80no. 5) 1/4 id hose(c05) as per en854-2te for service & parking brake tbu as per drg.no.mr/poh-3-5-0119alt-a or latest, if any (item no.5) with connector/nipple as per drg.no.mr/poh-3-5-0120 -32no. 6) 3/4 id hose as per en853-1sn for ass incoming hose as per drg.no.mr/poh-3-5-0119 alt-a or latest, if any (item no.6) with connector/nipple as per drg. no. mr/poh-3-5-0121 - 16no. 7) 5/8 id hose (b13) as per en854-2te for bogie to body bc pipe line as perdrg.no.mr/poh-3-5-0119 alt-a or latest, if any (item no.7) with connector/nipple as perdrg.no.mr/poh-3-5-0121 - 16no. 8) 3/8 id hose as per en853-1sn for pressure gauges(mr/bp & ar/bc) with connector/nipple as per drg.no.mr/poh-3-5-013 - 12 no. 9 ) 1 id hose(a02) sae 100r7 for vv-120 motor compressor with connector/nipple as perdrg.no.mr/poh/ac-3-5-014 - 34 no. 10) hose and hose clamp for vv-120 compressor asper drg.no.mr/poh/ac-3-5-016) 01packet consists of hose l-60(item-1 of drg)-01no, hosel-40(item-2 of drg)-1no and hose clamp(item-3 of drg) - 4nos - 4packets.

tender for modified bellow fixing arrangement to icf drg no.emu/m-0-05-007 alt.e/6.material & spen should be as per drg.

tender for leather bellow as per drawing number wr/mx/el-2014 3poh -tmc -001 item no.1.2&3 as per drg. no. wr/mx/el- 2014 /3-poh-tmc-001 .

tender for leather bellow for tm tao 659 and hs -15250a to rdsos drg. no - skel 4583alt - 2 and spec.no - spec/ e-7/06 (rev.- 2) july 2002.

supply of engineering allowance list items as per tender for p15b (metallic bellows and rubber bellows)

m03774/ rubber and expansion bellows for generator bust duct