Tender for Supply Of Standard Is Fire Beaters Are Often Used For Putting Off Small - Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited

The Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited, based in Etah, Uttar Pradesh, has issued a tender on the GeM portal, identified by Tender ID Gem/2026/B/7436654. This tender seeks the Supply Of Standard Is 8096- 1992 Fire Beaters Are Often Used For Putting Off Small Fires Such As Wild Grass, Shrubs, Dry Vegetation, Hay, Plastic, Coal Which Can Be Easily Put Out By Beating And Smothering. This Piece Of Equipment Finds Much Application In Rural Areas And In Those Places Where There Is A Scarcity Of Water Components 1. Handle- I-The Handle Shall Be Made Of Solid Bamboo Having 1800 Mm Length And 30 + 5 Mm Diameter Or Of Some Alternative Material Of Heat Insulate Properties Provided. The Handle Shall Be Finished Smooth.- Ii-The Handle Before Fitting Into The Socket Made In Shank Shall Be Liberally Swabbed With Termite Resistant Composition Comprising 10 Percent Solution Of Acid-Chromate Composition In Water. It Will Then Be Allowed To Dry For At Least 24 Hours.- Iii-The Free End Of The Bamboo Handle Shall Be Protected From Disintegrating By Fitting With A Hollow Close Ended Cap Made Of Chrome Plated Mild Steel Or Aluminium. The Protective Cap Shall Have Knurling Made On Its Outer Surface To Enhance Grip At Least 5 Mm Of The Round Edges Of This Knurled Protective Cap Shall Be Chamfered All Round At 45 Degree To Reduce Sharpness 2. Blade The Blade Of The Fire Beater Shall Consist Of A Rectangular Piece Of Expanded Mild Steel Or Steel Or Steel Wire Mesh Measuring 452 Mm X 352 Mm, Covered Fully On Both Sides With Stretched Fire Resistant Canvas Olive Green In Colour Placed Between Two Frames And Securely Fixed In Position With Hexagonal Nut-Bolts Using Spring Washers All-Round The Frame The Two Pieces Frame Shall Be Made Of 1 Mm Thick Mild Steel. The Width Of Frame Shall Be 30 Mm. The Shank Portion Of The Blade Shall Also Be In Two Pieces Made Of 1 Mm Thick Spring Steel. The Frame Shall Be Welded At Diagonals As Per Is Assembling The Blade So Made Shall Be Fixed With Bamboo Handle Through A Two Piece Shank. The Socket Part Of The Shank Shall Be Tightly Screwed To The Bamboo Handle By Two Bolts, Nu. The deadline for bid submission is 02 May 2026. Interested bidders can access the complete tender details and download the necessary documents from the GeM portal to participate in this procurement opportunity. Ensure to review all specifications and requirements thoroughly to submit a compliant and competitive bid.