Tender for Supplying And Installing At Site Knock Down Type Seater Meeting Table - Bridge And Roof Company India Limited

The Bridge And Roof Company India Limited, based in Dumka, Jharkhand, has issued a tender on the GeM portal, identified by Tender ID Gem/2025/B/6168638. This tender seeks the Supplying And Installing At Site Knock Down Type 12 Seater Meeting Table Of Of Overall Size 3600 X 1350 Maximum X 750 Mm Knock Down Type. Table Top Shall Be Made Of 25Mm Thick Pre Laminated Partical Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Whereas The Gable Ends Shall Be Of 25Mm Thick Pre Laminated Partical Board With Decorative Lamination On Both Side Alongwith 2Mm Thick Machine Pressed Pvc Edge Banding Glued With Industrial Adhesive And Monolithically Diffused. Supporting Understructure Consists Of 2 Metal C Legs On Either Ends Of Table Support Frame Made Of 50Mm X 50Mm X 1.6 Mm Wall Thickness Ms Erw Tube And One Number Wire Carrier Leg At Middle Of 50Mm X 50Mm X1.6Mm Wall Thickness 4 Numbers Horizontal Connector Of 40Mm X 40Mm X 1.6Mm Thick Ms Pipe Between Supporting Vertical Legs. All The Ms Pipes And Sheet Shall Be Finished With Epoxy Powdercoated Of Dft 50 60Micron. The C Typed Metal Legs Shall Be Kept 150Mm Inside From Outer Edge Of Table Top. Wire Management The Vertical Stake And Horizontal Cable Tray Wire Carriers Are Placed Below Worktop Made Up Of Crca Steel Sheet With Epoxy Powder Coating And Fixed To The Understructure With Specially Designed Brackets Including Provision Of Placing Switch Platespergrommet In The Cable Tray .. The deadline for bid submission is 08 May 2025. Interested bidders can access the complete tender details and download the necessary documents from the GeM portal to participate in this procurement opportunity. Ensure to review all specifications and requirements thoroughly to submit a compliant and competitive bid.