up gradation, remodeling and re-alignment of delivery pipe lines of all the three no pumping units with allied works at lis kundra .the job involves unfastening/cutting of rusted nuts, bolts and flanges from the old 02 no. installed delivery pipe lines, dismantling of all the three no delivery pipeline including the delivery line network/fittings of priming pumping unit and then shifting of all the dismantled delivery lines along with accessories and other electrical equipments to the safe working place after proper disconnecting of all incoming and outgoing electrical connections. job further include remodeling/ fabrication of existing delivery pipes as per new alignment ,providing and fabrication of new bends, flanges, gaskets, nuts/bolts ,pipe extension pieces as per site requirement/ new alignment. excavation of 03 no trenches manually of required size suitable for underground laying of delivery pipe lines, disposal of excavated material at proper place and leveling of the trenches and then laying of one layer of 1:2:4 concrete mass of minimum 6 thick for safe/proper laying of pipes and then laying of delivery pipelines inside the trenches properly using bends, ms flanges, gaskets, nuts/bolts and other fittings required during laying including installation of nrvs and sluice valves outside the pump room after proper repair/recapitalization of all the sluice/reflux valves including fabrication/fitting of bypass system, making of connection of three delivery lines with manifold/rising main with proper welding using good quality welding electrodes. job also includes refitting of all the delivery pipeline network and other gi fittings of priming pumping unit as per new alignment. job also includes complete electrification of pump room by way of extraction / removing of old damaged wiring along with burnt switch socket etc. providing of point wiring with 1/1.5 sq mm or equivalent copper cable for light / fan points / socket points approximately 8 nos. inside and outside pump room. the job also includes providing and fitting of gang boxes, switches, sockets, holders, led bulbs, flood/led light- 02 nos with ms pipe frame for anchoring at suitable place, ceiling fan-01 no along with required hook with regulator, spn-02 no. of suitable rating required for lighting circuit and other fittings as per site. the job includes providing and fitting of service connection with 10mm2 2 core aluminum cable-20 meter (approx) to the lighting circuit from main supply junction to spn. job further include complete flooring of pump room by way of excavation of damaged floor up to the required depth, removal of excavated material and disposing off the same at proper place, laying of crushed stone 40mm,laying of 1:4:8 concrete mass 100mm depth and then laying of cement concrete mass in the ratio of 1:1.5:3 with proper grouting and then complete curing including construction of cable ducts of required size for safe laying of electrical cables inside the pump room wherever required. job includes providing and fabrication of ms duct cover of appropriate size as per duct size for the safety of cables including construction of entrance concrete ramp at the entry of the pump room for safe handling of the electro mechanical equipments. shifting of all the dismantled electrical equipments inside the pump room and then installation of the same at appropriate place by connecting all electrical cables including providing and fitting of new aluminum /copper cables if required as per site . job also includes repairs to 300 mm dia rising main by way of plugging the leakages by welding as per site requirement to make it leak proof and then painting of exposed portion of 300mm dia 534 metre ms rising main after cutting of all the bushes around the laid rising main from pumping station upto the delivery tank, removing of all the dirt/dust and foreign deposits on the rising main with the help of sand/emery paper, applying one coat of red oxide primer and then two coats of black enamel paint on the exposed portion of rising main after proper testing of joints on rising main and delivery lines including proper painting of shutter, door, windows of the pump room including all suction and delivery pipelines and duct covers.
complete job include cost of material, skilled/semiskilled labour charges, loading/unloading and head load charges, hire charges of shuttering, welding equipments and other tools and tackles required for the job, inclusive of all taxes as applicable. complete job.
