tender for fastener set for shock absorber mounting - wdg3 & wdm3 locosconsisting of the following 4 items: a). hex. headed ht. bolt m 22x2.5x130mm long withthread length of 50 plus or minus 10mm and 5mm dia. hold drilled at 10mm from thetail end of the bolt for providing a split pin, confirming to is: 1367, property class-10.9, b).castle nut size of m 22, confirming to is: 1367, property class-8.0, c). plainwasher 3mm thick suitable for m22 bolt confirming to is:2016 and d). ms split pin for4mm dia x 50mm long confirming to is: 549.note: 1) test procedure for qualitycontrol of the fastener shall be done as per dlw spec.no.misce-109 dated 06/12/2003with aql 2.5.2. bolt embossed with manufacturers identification code with materialproperty grade on the bolt head face will only be considered . 3. offer quoting thrbrand name of their offer along with copy of valid dealership certificate issued bytheir dlw approved principals only will be considered.