tender for ice lined refrigerator 1. gross storage capacity: at least 150 litres. 2. net vaccinestorage capacity: at least 110 litres within basket in place. 3. chest type device with cfc free insulation. 4. type:compression cycled, cfc u2013 free (both for refrigeration and insulation). all system tubing (suction tube,freezer tube and condensing tube) should be of minimum 99.97 of pure copper coil. 5. refrigerant: nonu2013cfc, non hcfc, eco-friendly refrigerant. 6. temperature of all vaccines to remain at +2 degree celsiusto +8 degree celsius during continuous availability of energy at ambient temperature +5 to +45 degree celsiuswith intermittent/ continuous electricity supply 8 hrs in a 24 hrs cycle. the temperature difference between anytwo points in the cabinet should not be more than +2 deg. celsius once stabilized. 7. target holdover time shouldbe at a minimum of 24 hrs or more in a continuous external temperature up to 43 deg c. 8. provision for drainagefor the waste water. 9. the unit should have ground clearance of minimum 100mm. 10. on/off switch andpower indicator should be available. 11. a microprocessor based control unit should be provided for setting oftemperature. 12. sensor: fast response ntc thermistor sensor. the sensor should be placed 25 to 50 mmabove base of storage chamber. 13. power on led/lcd indicator. 14. audio and visual alarm against theviolation of temperature range (beyond +2 to +8 degree c range). 15. programmable micro- processor controlunit with child lock facility. 16. the equipment should have auto defrosting program. 17. vaccine storage basketallowing free circulation of air, having the size suitable to match the net volume requirement. there should beminimum 3 wire baskets attached to the inside chamber. 18. stem alcohol thermometer with following features-a) specifications and standard as per who/mohfw with temp range - -30 deg c to +50 deg c b) whospecification reference: e6/th3 c)applies to procedures: e6/prcoc/2 19. voltage stabilizer as per the mohfwapproved specifications and standards. a) automatic regulation relay type voltage stabilizer will provide a pre-setac output 220v +/-5 for fluctuating ac input voltage. b) should work for input voltage range of 150-280 volt ac,single phase, with low voltage cut-off when the input voltage falls below 150v +/-5v & high voltage cut-offwhen the input voltage goes beyond 280v +/-5v. c) protection: - over/under voltage, over load & short circuit.d) provision for an output socket of 5 amps isi marked. 20. the supplier is required to maintain all the spare partsthroughout the warrantee period and cmc period. 21. product should be fda/ce/iso approved. 22. the productshould meet who/unicef standard who/pqs/e003 for ice lined refrigerators. 23. test and inspection as perwho procedure reference who/pqs/e003 should be done and valid certificate must be obtained. testing andinspection should be carried out from a who certified lab/ nabl/ilac /stqc labs. certificate of testing shouldbe currently valid till the supply and same must be verified by inspecting authority. 24. a paper copy of technical/wiring diagram to be supplied in english. 25. the original company user manual with brochure in english shouldbe submitted.
