p/l in position cement concrete of specified grade excl. the cast of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size). incl. all carriages of material involved. providing/laying in position specified grade of reinforced cement concrete work in plinth, columns,suspended floors etc excluding cost of centering, shuttering, finishing and reinforcement in (1:1.5 : 3) 1 cement: 1.5 : coarse sand 3: graded stone aggregate 20mm nominal size) incl. all carriages of material involved and head load. upto plinth:- in columns/suspended floors etc:- providing/laying in position specified grade excluding the cost of centering & shuttering all work upto plinth level. (m-10 mix) 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size- crushed.) ncl. all carriages of material involved. reinforcement for rcc work including straightening, cutting, bending, placing in position and binding all complete (thermo-mechanically treated bars) including head load & carriage by mt brick work with (common clay burnt up bricks) in foundation & plinth in cement mortar of mix 1:6 (1 cement: 4 coarse sand) including extra cost above plinth level upto floor v-level. incl carriages/headload of bricks upto site of work complete job. centering and shuttering, including strutting, propping and removal of form work kitply. upto plinth level, columns, suspended floors etc including head load & carriage all complete. upto plinth:- columns/suspended floor:- filling trenches of foundation with available (excavated) good soil as refilling of gaps sides of plinth/ foundation trenches. p/l conduites for electric wiring, fan boxes, light boxes incl bends all complete including binding conduites with binding wire all complete job: fan boxes: light boxes: conduits: providing and fixing factory made upvc white colour casement/casement cum fixed glazed windows comprising of upvc multi-chambered frame, sash and mullion (where ever required) extruded profiles duly einforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvc profile), upvc extruded glazing beads of appropriate dimension, epdm gasket, stainless steel (ss 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, g.i fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and ecessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer-in-charge. ( toughned glass panes as approved by engineer in charge note: for upvc frame, sash and mullion extruded profiles minus 5 tolerance in dimension i.e. in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. structural steel work welded in built up sections trusses & framed work including cutting hoisting welding & fixing in position & applying a priming coat of approved steel primer in trusses,rafters, purlins etc all complete including carriage & head load including cost of ms plate soffits under chajja and eaves boarding: providing and fixing with high rib colour coated gs sheet roofing including vertical/curved surface including polymer coated j. or l hooks,fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, 0.50 mm thick providing ridges or hips of width 60cm overall width plain g.s. sheets 0.5 mm fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12 -15 mm cement plaster in 1:6 mix incl. all carriages of material involved. including head load & carriage providing and fixing factory made upvc white colour casement/ casement cum fixed glazed/panneled door comprising of upvc multi-chambered frame, sash and mullion (where ever required) extruded profiles duly forced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvc profile), upvc extruded glazing beads of appropriate dimension, epdm gasket, zinc alloy (white powder coated) 3d hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer-in-charge. ( incl cost of single toughened glass panes/pannel and silicon sealent ). note: for upvc frame, sash and mullion casement door with 3d hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate. applying 2mm thick white cement based wall care putty on wall surface for smooth finish (two or more coats) including head load & carriage providing and fixing anchor bolts 450 mm long 16-20 mm dia with all nuts washers and gouting of bolts all complete job. providing and fixing wash basin with c. i./m.s. brackets, 15mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, all accessories and fittings- cutting and making good the walls wherever required: white vitreous china white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps: approved as per engineer incharge providing and fixing white vitreous china pedestal for wash basin completely recessed at the back , or the reception of pipes and fittings. providing and fixing c.p. brass angle valve for basin mixer and gyser points of approved make 15 mm nominal bore jaguar or like. providing and fixing brass bib cock or of equivalent and desired pattern of approved quality. 15 mm nominal dia bore jaguar or as like providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. providing and fixing pvc waste pipe for washbasin or sink flexible type complete job. providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with c. p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete providing and fixing toilet paper holder c.p. brass providing and fixing pvc soil, waste and vent pipes with appertenances, accessories : (b type) 100 mm dia. 75 mm diameter. providing and fixing ppr. pipes complete with ppr fittings and clamps, appertenances,accessories including cutting and making good the walls etc.concealed pipe including cutting chases and making good the wall of approved specification. as approved by engineer incharge. 25 mm - 32 mm dia. nominal bore providing and placing on terrace (at all floor levels) polyethylene water storage tank lsi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [sintex, electroplast, star, lotus or equivalent having valid lsi license]. constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) r.c.c. top slab with 1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size)finsihed with a floating coat of neat cement complete as per standard design. inside size 90x80 cm and 45 cm deep including pvc. cover with frame (light duty) 455x61 omm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)with f.p.s. bricks with class designation 75 & with (a) crushed stone aggregate p/f white vitreous china european type wc with seat lid and 10 lit flushing cistern including all appernances , pvc and other connections of desired make as approved by the engineer incharge. p/f white vitreous china flat back or wall corner type lipped urinal basin 430 x 260 x 350 mm with 5 lit automatic flushing cistern including all appernances , pvc and other connections of desired make as approved by the engineer incharge. providing and laying antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to is:15622 of approved make, in all colours and hades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. ;complete 600x600mm incl necessary levelling course in 1:3:6 providing and fixing ist quality ceramic glazed wall tiles conforming to is : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer- in-charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 1x1.5 providing and laying granite stone flooring/skirting/dadoo in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge : 11.66.1 providing and fixing stainless steel (grade 304) railing made of hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). dry stone random rubble masonry with hard stonesfor soackage pit incl all carraiges p/f of electric fittings with wire of good quality having heating points 20 nos, fan points 14 nos, lighting points 50 nos and main board/controll panel, switches, pvc conduites of approved brand or as directed at site, including necessary external service line: painting walls with two or more coates of cement based water proofing paint(excel) interior as well as exterior. incl all carraiges and accessories for preparing surface and scaffholding. providing and fixing of 50 litres geysers specifications as per is standard
