Bolts And Nuts×Drill Machine×Fire Extinguisher×G I Sheet Roofing×Paint×Painting Brushes×Rivet×Saw Machine×Shelter×Structure Materials×fire system×Painting×

MINISTRY OF DEFENCE

TENDERS DETAILS

supply of 1 store shelter store shelter 7.30m x 7.00m with front height 4.00 m and rear height 2.90 with 1.50m wide front side ramp (structural steel, main column, truss, purlin, end purlin, rafter, nut and bolts, fasteners, sds, wind tie, wall clading with 0.60 galvanised sheet and roof sheet for covering complete all as specified in ts) and with followings :-(a) lightening arrester - 03 no(b) front gate no 1 - 3 nos (as specified in drawing)(c) front gate no 2 - 3 nos (as specified in drawing)(c) flooring with ramp note-all above items shall be supplied for 3 sets of shelter complete all as per specified in descripton of work 2 paint paint (ral -1001) make- asian/johnson and nicholson/ shalimar 3 tarpentine oil tarpentine oil 4 red oxide red oxide make- asian/johnson and nicholson/ shalimar 5 paint brush brush 75 mm wide painting brush 6 fire extingushier 2 kg fire extingushier 2 kg 7 welding machine crux weld welding machine particular are as under :- (a) type of welding machine - portable inverter type (b) nos of phase - single (c) input power capacity - 7 kva(d) input voltage frequency - 50 hz(e) efficiency percentage - 85(f) primary power supply - 220-240v ac, 50 hz (g) type of cooling - air cooled (h) primary continues current - 10-20 amp 8 cutting saw bosch highspeed steel /wood cutting circular saw particular are as under :- (a) power input - 2200 watt (b) cutting depth - 125 mm(c) no load speed - 2999 rpm (d) diameter of circular saw - 14 inch (e) thickness of wheel circular saw - 2 mm (f) material of the blade - abbrassive blade 9 circular saw steel/iron cutting circular saw of dia 12 inch and thickess 2 mm, make : bosch 10 industrial helmet industrial hard helmets as per is code 6506. sample will be approved by oc, 426(i) fd coy before supply. 11 pan mortar pan mortar (tasla) 18 dia as per is code 8201 12 safety goggles vega multi lens polycorbonate safety goggles make : vega. sample will be approved by oc, 426(i) fd coy before supply. 13 welding rods mild steel welding rods size 2.70x350mm , 90 pieces per pocket 14 hand gloves hand gloves rubber.sample will be approved by oc, 426(i) fd coy before supply. 15 drilling machine bosch corded brushed electric drill 800 watt 16 rivets rivet (per packet 1000) 17 paint white cement base paint make : snocem 18 bitumen blown bitumen 135/10 19 cement ordinary portland cement grade 43, is-12269-1990, packed in 50 kgs hdpe bags conforming to is11652/2000. make : acc/ambuja/jk. 20 sand coarse sand. sand shall be clean, sharp, angular hard and durable free from adherent coating and shall not contain clay, mica and other impurities. the maximum quantities of clay and fine silt in sand shall not be more than 5 by mass as per is-383-1970 and grade shall comply with zone-ii to zone iii. 21 20mm aggregate stone aggregate shall be crushed stone 20mm graded conforming to is-383 1970 and shall be clean hard tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. 22 hollow blocks hollow block, pcc 1:2:4, size 400x200x200mm : -(a) hollow block shall conform to the requirement of is-2185 (part-ii) 1983.(b) tolerance. the maximum variation in dimension shall be not more than + 10mm for height, breadth and length (c) compressive strength of individual hollow block should not be less than 2.5n/mm2.

  • CITY & STATE
    Multi city,Multi State
  • REF No:
    20496105
  • TENDER AMOUNT:
    Ref. Doc.
  • Last Date:
    27 Aug 2021
  • Tender Number Only Subscriber can view
  • Published By Only Subscriber can view
  • Website Name Only Subscriber can view
Archived
GeM tender portal

SIMILAR TENDER