Angle×Ash Brick×Nails×Polyfilm×Sand×Stone×Washer×Wood×

MINISTRY OF DEFENCE

TENDERS DETAILS

supply of 1 fly ash bricks of size 230mm x115mm x75mm with frog size 110 x 40 x 10-20mm having min compressive str 75 kg/cm2 and conforming to is 12894 of 2002. 2 cement bags opc conforming to is -1489 (part-i) 1991 with amdt no 1 to 3 packed in hdpe bag of 50 kg each confirming to is-11652/2000 (make : ambuja/ birla/ ultratech / shree ultra) 3 sand coarse (sand should be free from silt, clay and organic mtrls) 4 fine sand (sand should be free from silt, clay and organic mtrls). 5 graded stone aggregate of size 40-63mm graded (aggregate shall be as per is 383-1970 ). 6 graded stone aggregate of size 40mm graded (aggregate shall be as per is 383-1970 ). 7 graded stone aggregate of size 20mm graded (aggregate shall be as per is 383-1970). 8 water proofing compound 9 srt of size 2440mm x 613mm x 180mm made of 2mm thick hot rolled steel with 8mm dia 25mm long nuts, bolts and 2 nos 2mm thick gi washer.(isi marked) 10 ismb 150 x75mm 3.66 mtr long wt of the ismb not less then 15 kgs/mtr isi marked. (make : sail/tata/capital) isi marked 11 sand bag 12 pbs roll (20 mtr x 01 mtr) 13 synthetic enamelle paint 14 red oxide primer 15 thinner of (make : shalimar/ asian/jenson and nicholson/berger/goodlas nerolac) 16 primer for distemper (make asian/ nerolac/ berger/ shalimar) 17 stainer golden yellow colour (250 ml per tin) 18 stainer brown colour (250 ml per tin) 19 oil bound distemper ( make shalimar / asian / johnson and nicholson/ berger / goodlas nerolac) 20 primer for cement base paint (make: snowcem, durocem) 21 cement based paint (make: snowcem, durocem) 22 turpentine oil 23 tmt bar 10mm dia (make : sail/ tata/ capital) isi marked 24 tmt bar 8mm dia (make : sail/ tata/ capital) isi marked 25 ms binding wire 0.9mm dia (annealed) 26 polythene sheet colorless and weight of sheet shall not be less than 50 gm /sqm 27 pre-fabricated steel door of size 900mm x 1800mm, frame made of angle iron 40 x 40 x 6mm. shutter madeup of angle iron frame of 35mm x35mmx6mm and panels of 2mm thick ms sheet 28 pre-fabricated ms loop hole shutter of size 780 x 330mm/780x600mm as approved by the fmn with downward opening shall be provided. 29 steel ventilator of size 600mm x 450mm with downward opening on the exterior face of wall will be provided. 30 inbuilt two bays of size 300mm(width) x 600mm (height) x 250mm (depth) for storage of amn created at a ht of 600mm from floor level. 31 stone slab 40-50mm thick (02 nos) of size 1050mm x 2050mm 32 bunk stairs made out of ms pipe 25mm dia med grade pipe 400mm wide and reqd height at site 33 50mm dia ms pipe (med grade) with base plate as in support to upper bunk incl angle iron support of ms ange 50 x 50 x 5mm for end support one side embedded in wall 34 amn box. 2 x detachable steel amn boxes of size 780mmx480mmx 310mm made of pgi sheet all specs as per ts attached 35 round wire nails (plain head) 80 x 4 mm dia 36 round wire nails (plain head) 100 x 4 mm dia 37 round wire nails (plain head) 50 x 2.8 mm dia 38 polyethyline film for covering shuttering purpose 39 plumbob (screw type) size no 5 make : paradise 40 ply wood 8x4x12mm for form wk make : national/kit ply 41 scantling 3 x 3 hard wood for shuttering

  • CITY & STATE
    Multi city,Multi State
  • REF No:
    20426930
  • TENDER AMOUNT:
    Ref. Doc.
  • Last Date:
    23 Aug 2021
  • Tender Number Only Subscriber can view
  • Published By Only Subscriber can view
  • Website Name Only Subscriber can view
Archived
GeM tender portal

SIMILAR TENDER