supply of 01 9911837443 (bolster size 1500x800x100mm) bolster for press tool size : 1500 l x 800 w x100 mm t.tolerance 2mm material : grey cast iron , to spec. is: 210:1993, grade fg-200. the casting shall be sound, clean and free from porosity, blow holes, hard spots, cracks, hot tears, cold shuts, distortion, sand and slag inclusions and other harmful deffects. edges of casting should be right angle to each other. any welding/repairing should not have been carried out. supplier must submit test report of material for physical and chemical properties from approved nabl lab. with ultrasonic test. bolster shall be well dressed and fitted. 10 nos 02 9911839677 ( bolster size : 1000x200x75mm) bolster for press tool size: 1000l x 200w x 75 mm t. tolerance 2 mm material: grey cast iron, to spec. is: 210:1993, grade fg-200. the casting shall be sound, clean and free from porosity, blow holes, hard spots, cracks, hot tears, cold shuts, distortion, sand and slag inclusions and other harmful deffects. edges of casting should be right angle to each other. any welding/repairing should not have been carried out. supplier must submit test report of material for physical and chemical properties from approved nabl lab. with ultrasonic test. bolster shall be well dressed and fitted. 10 nos 03 9911839678 ( bolster size : 1200 x 700 x 100mm) bolster for press tool size: 1200 l x 700 w x 100mm t. tolerance 2 mm material: grey cast iron, to spec. is: 210:1993, grade fg-200. the casting shall be sound, clean and free from porosity, blow holes, hard spots, cracks, hot tears, cold shuts, distortion, sand and slag inclusions and other harmful deffects. edges of casting should be right angle to each other. any welding/repairing should not have been carried out. supplier must submit test report of material for physical and chemical properties from approved nabl lab. with ultrasonic test. bolster shall be well dressed and fitted. 10 nos 04 9911837447 ( bolster size : 800 x 800 x 100mm) bolster for press tool size: 800 l x 800 w x 100mm t. tolerance 2 mm material: grey cast iron, to spec. is: 210:1993, grade fg-200. the casting shall be sound, clean and free from porosity, blow holes, hard spots, cracks, hot tears, cold shuts, distortion, sand and slag inclusions and other harmful deffects. edges of casting should be right angle to each other. any welding/repairing should not have been carried out. supplier must submit test report of material for physical and chemical properties from approved nabl lab. with ultrasonic test. bolster shall be well dressed and fitted. 10 nos 05 9911839351 ( bolster size : 1500 x 1000 x 100mm) bolster for press tool size : 1500 l x 1000 x 100mm t. tolerance 2 mm material: grey cast iron, to spec. is: 210:1993, grade fg-200. the casting shall be sound, clean and free from porosity, blow holes, hard spots, cracks, hot tears, cold shuts, distortion, sand and slag inclusions and other harmful deffects. edges of casting should be right angle to each other. any welding/repairing should not have been carried out. supplier must submit test report of material for physical and chemical properties from approved nabl lab. with ultrasonic test. bolster shall be well dressed and fitted. 10 nos 06 9911839352 ( bolster size : 1200 x 1000 x 100m) bolster for press tool size : 1200 l x 1000w x 100mm t. tolerance 2 mm material: grey cast iron, to spec. is: 210:1993, grade fg-200. the casting shall be sound, clean and free from por
