cherpulassery municipality 2021-22 kunnumpuram kudivella padhadhi.-2.8.1 : earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 4.1.8 : providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 5.1.2 : providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 5.2.2 : reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 5.3 : reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (zone iii) : 3 graded stone aggregate 20 mm nominal size). 5.22.6 : steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 5.9.1 : centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete 5.9.6 : centering and shuttering including strutting, etc. and removal of form for:columns, pillars, piers, abutments, posts and struts 5.9.3 : centering and shuttering including strutting, etc. and removal of form for:suspended floors, roofs, landings, balconies and access platform 5.9.5 : centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 18.48 : providing and placing on terrace (at all floor levels) polyethylene water storage tank :isi 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 10.16.1 : steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished welded type tubes od1254667/2021 2022 : digging borewell of 150mm dia including all charges od1174688/2021 2022 : supplying aand fixing pvc end cap suitable for 180mm casing pipe incliding all cost conveyance and fixing charges od1254679/2021 2022 : supply and errect ready made ferrocement pump house of size 1.5x1.5x2.1m with following specificationrcc post shall be fixed in pcc 1:3:6 of size 45x45x45cm, foundation alround with solid block masonry with cm 1:6bof 30x40cm size ferrocement wall of 1.5mx2.1m of thickness 25mm , ferrocement traingular type roof made of ferrocement slab of thickness 25mm, ms door of size 75x210cm with 1mm thick ms sheet and suitable gi frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable locking arrangement and a pad lock of 5 lever , ms ventilator of size 60x40cm, flooring with cc 1:4:8 75mm thick and plastered over 12mm thick cement plaster 1:4 and neat cement flushing coat and all wall surfaces and roof shall be painted with two coats of exterior emulsion paint over coat of primer. od1254683/2021 2022 : supplying and fixing pvc casing pipe of 180mm dia 6kg/cm2 including all charges. od1254685/2021 2022 : supply install test and commissioning of tube well submerssible motor and pump set up to and including 10hp in existing tube well with following:a) 50mm dia upvc pipe 66mb) 3 core 4sqmm upvc cable 70mc) nylon rope for hanging the motord) gi clampe) non return valvef) 50mm gi bend , 50mm pipe upto non return valveg)panel board made of powder coated gi sheet with suitable frame work with isi marked dol starter , main switch 440volts , 100ma 4 pole elcb , capacitor , selector switch-2 nos, ammetter ,voltmeter,indicator lamp -3nos etc(rate per hp) 50.18.9.7.1 : providing and fixing pvc pipes includings of pipes with one step pvc solvent cement, trenching refilling and testing of joints complete as per direction of engineer in charge. 63 mm dia 6kgf/cm2 18.12.6 : providing and fixing g.i. pipes complete with g.i fittings including trenching and refilling etc. external work50 mm dia nominal bore od1307427/2021 2022 : site investigation charges to identify suitable site for digging borewell including all charges.
