expansion of product block at bamul premises1 5.26.1/ pg 27 ksrb-5-14: providing and constructing precast concrete solid blocks with compressive strength not less than 3.5 newton per sqmm with cement mortar 1:4 masonry (quoin, jamb, closer blocks) with solid concrete blocks of size 40x15x20 cms. conforming to i.s 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications. -do- with solid concrete blocks of size 400*200*200mm sqm 596.4 2 15.16- pg116 ksrb 15.3.7 providing 18mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. ksrb 15.3.8 do cement mortar 1:4 sqm 456 3 14.41.2- pg.108 ksrb-14.17-2: providing skirting, dadooing, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface using, glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. sqm 768 4 15.30/ pg.117 ksrb 15.5.1: providing rough cement plastering 15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, provided and removing scaffolding, including cost of materials, labour, curing complete as per specifications.--do- cm 1:4 sqm 1188 5 15.12/ pg.115 ksrb 15.3.4 providing 15mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. cm 1:3 sqm 326.4 6 15.15/ pg.116 ksrb 15.3.7 providing 18mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. cm 1:3 sqm 84 7 mr providing and laying flooring using prepolished, water cut/gang saw 30mm thick ilkal granite laid over bed of 20mm thick 1:4 cm and jointed with neat cement slurry mixed with pigment to match shade of granite stabs including laying pop on finished surface and cleaning the surface including the cost of all materials and labours etc., complete as per specifications. sqm 216 8 4.12/ pg.14 ksrb 4.2.7: providing and laying in position reinforced cement concrete of design mix m25 with opc cement @ 340 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70cum and fine aggregates @ 0.47cum with superplastisiser @3lts confirming to is9103- 1999 reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, hom of machinery, curing, complete but excluding cost of reinforcement as per specifications. (excluding cost of steel, fabrication and finishing charges) cum 431.1948 9 7.30/ pg.43 fabricating, supplying and erecting m.s. angular truss for all span up to 10m. the bottom and top member is provided with 50 x 50 x 6 mm double equal angles, welded back to back and in between top and bottom line, in areas of mid section is provided with 50 x 50 x 6 mm equal single angle for vertical and inclined members and at supporting ends 40 x 40 x 5 mm single angle is provided. as the members are welded together with 6 mm gusset plate as per drawing no. cbs/sd/k-mantap/9/mnd/97. the entire truss is anchored inrcc column by using 4 no.s. of m.s. anchor bolts at each support, with 10 mm thick base plate and shoe plate. the work includes cutting, straightening, placing in position of m.s. angle and welding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments,etc., complete as per specification. kgs 4786 10 38.30/ pg.299 providing and installing of pre painted galvolume iron trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. the total coated thickness (tct) of the sheet will be 0.47 mm +/- 0.02 mm tolerance zinc-alu alloy coating az150 gsm as per astm 1397/a755-550 mpa steel grade. 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses. sqm 1104 11 15.9/ pg.115 ksrb 15.3.1 providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. sqm 2171.832 12 15.35/ pg.117 ksrb 15.8.1 : providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35 mm with a zinc coating of 120 gms per sqm width, along route of walls chipped for services, junction between rcc and brick walls including cost of materials, labour for fixing complete as per specifications. (length of mesh only be measured for payment) mtr 600 13 mr providing and laying flooring using acidproof 20mm thick tile laid over bed of 20mm thick 1:4 cm and jointed with neat cement slurry mixed with pigment to match shade of granite stabs including laying pop on finished surface and cleaning the surface including the cost of all materials and labours etc., complete as per specifications. sqm 864 14 15.106/ pg.128 providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of materials, cost of labour and scaffolding etc., complete as per the specifications. sqm 2078.4 15 15.90+15.91/pg.128 ksrb 15-22.4 : providing marble chips skirting or dadoing (upto 30 cms height) rubbed and polished to granolithic finish, top layer 6mm thick with white, black, chocolate, grey, yellow or baroda green marble chips from smallest to 4mm nominal size, white cement without any pigment (in top layer only) laid in cement marble powder 3:1 (3 cement : 1 marble powder by weight) in proportion of 4:7 (4 cement marble powder mix :7 marble chips by volume) overall thickness 24 mm (18mm thick under layer, 6mm thick top layer) in cement mortar of mix 1:3 including cost of materials, labour, complete as per specifications. and ksrb 15-22.5 : extra labour for work in dado exceeding 30 cms in height including cost of labour, complete as per specifications. sqm 420 16 15.51.2/ pg.119 ksrb 15-15.2 : providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after throughly brooming the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. sqm 2254 17 4.53/ pg.19 providing and casting reinforced cement concrete racks with design mix m20, granite or trap jelly 12mm and down size 5 cms thick and below with reinforcements of 6mm dia ms bars at 15 cms. centre to centre for main reinforcement and at 30 cms centre to centre for distibution including supports wherever necessary with burnt brick in cm 1:4 including centring, form work, curing etc., complete (inclusive of cost of steel and fabrication charges). sqm 108 18 31.1/ pg.244 ksrrb m2600-1. providing and laying a burried expnasion joint, expansion gap being 20 mm, covered with 12 mm thick, 200 mm wide galvanised weldable structural steel plate as per is:2062, placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8 mm dia, 100 mm long galvanised nails spaced 300 mm c/c along the centre line of the plate, all as specified in clause 2600.4 mtr 24 19 4.46.3 + 4.47 / pg.18 ksrb 4.9.2 : providing tmt steel reinforcement for r.c.c. work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoiningmembers wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, hom of machinery complete as per specifications. lift charges for steel of all diameters for additional floors over ground floor per floor height of 3.5 m or part thereof cost of labour, complete as per specifications. --tmt bars fe550 tonne 71.0315 20 7.11.1/ pg.35 ksrb 7.11: providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm. bottom section 1.3mm thick, weight 1.07 kg/m, sides and top sections 1.3 mm. thick weight 0.933 kg/m; shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm, weight 0.417 kg./m; shutter side outer 40 mm x 18 mm, wall thickness 1.25 mm, weight 0.417 kg/m, shutter interlock section 40mmx26.7mm. wall thickness 1.1mm. thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections anodised 12 to 15 microns thick including cutting to required length, joints mitred subdiving the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar. sqm 35.1 21 4.33/ pg.16 ksrb 4-6.6: providing and removing centering, shuttering, strutting, propping etc., and removal of form of work for columns, pillars, post and struts, circular or curved in plan including cost of all materials, labour complete as per specifications.-----circular columns sqm 90.432 22 4.32/ pg.16 ksrb 4-6.5: providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specifications.--- columns sqm 329.4 23 4.30/ pg.16 ksrb 4-6.3: providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per specifications.----roof slab sqm 1104 24 4.36/ pg.17 ksrb 4-6.9: providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications.----edges of slab sqm 10.5 25 4.20/ pg.15 ksrb 4.2.11: providing and laying in position reinforced cement concrete of design mix m20 with opc cement @ 27.20 kgs, with 12mm and down size graded granite metal coarse aggregates @0.05865cum and fine aggregates @0.0391cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 8.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, hom of machinery, finishing, curing, complete but excluding cost of reinforcement as per specifications. sqm 16.38 26 4.37/ pg.17 ksrb 4-6.10: providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specifications.------chejja sqm 16.38 27 8.24/ pg.49 ksrb 8.7-5 : providing and fixing in position 12mm thick plaster of paris (gypsum anhydrous) for ceiling flat survace with ceiling tiles reinforced with hessian cloth upto a height of 5m above floor level over aluminium strips frames and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. sqm 80 28 7.15.2/ pg.37 ksrb 7.15 : providing, fabricating, assembling and fixing in position anodized aluminium partition using aluminium sections of mat finish or glassy finish in combination of plain groove, single groove and double groove as per requirements for the frames of overall size 63.5mm x 38.1 mm with thickness of 2 mm. having section weight, plain sections 1.054kg/m single grove thickness 1.95mm. section weight 1.094 kg/m, doubled groove thickness 1.9mm section weight 1.094 kg/m and bottom member 114.3 mm x44.45mm. thickness 3.18mm. weight 2.646 kg/m; aluminium louvres section of size 36.5mmx34.93mm 1.45mm. thick section weight 0.429kg/m; bottom portions provided with 12mm. thick prelaminated sheet both sides of approved colour lamination exterior grade upto 0.9m height, spacing of vertical member shall not exceeding 0.6m c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames; the assembled frame stiffened with corner angles, stripped and fixed with screws, rawl plugs and teak wood gutties to r.c.c. columns on sides, r.c.c. linteles or beams at top and floor at bottom, including cutting chistelling and making good with cement mortar to match the surface; providing and fixing 5.5mm. thick plain glass for middle portion viz., 0.9m to 2.13 m. and top panel with louvres sections; the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124kg/m; aluminum sections anodised 12 to 15 microns, sections treated for removal of any rust and prevention of further rust formation, coated with greasy materials for no-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable sized holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door ) all the frame should be throughly cleaned, free from rust, scale or dirt including cost of materials, fixtures, labour, and hom or machinery complete as per specifications. sqm 266.4 29 7.17.2/ pg.39 ksrb 7.17 : providing, fabricating, assembling and fixing in position anodized aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00 mm, section weight 1.426kg/m, bottom section 114.3x44.45mm thickness 3.18mm, section weight 2.646 kg/m, door central section 49.91 x 44.45 mm thickness 3.00 mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124 kg/m; aluminium sections anodized 12 to 15 microns cut to length joint metered corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or lengthm tower bolts, lock, pivots; p.v.c. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to r.c.c. columns or masonry on sides. beams and flooring in bottom, including cutting, chistelling and making good with cement mortar to match the surface; all the frames throughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and hom of machinery complete as per specifications. sqm 15.12 30 7.9/ pg.34 ksrb-7.9: providing and fixing m.s. grill work for windows and ventilators weighing 21 kg/sqm using m.s. flats, or m.s. square rods, or combination of m.s. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and hom of machinery complete as per specifications. kgs 1111.32 31 11.37/ pg.73 ksrb 12-5.1 : constructing brick masonry circular type manhole 0.91 m internal dia at bottom 0.91m deep and 0.56m dial at top with table moulded non-modular bricks of 50 class designation 50 in cement mortar 1:4, inside cement plastered 12mm thick with cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete m 10 using 40mm and downsize granite metal and making necessary channel in cement concrete m 15 with 20mm and downsize granite metal finished with a floating coat of neat cement, with s.f.r.c. cover and frame (heavy duty, hd-20 grade designation) 560 mm internal diameter confirming is:12592, total weight cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4, 20mm and downsize broken granite metal, providing and removing centering, shuttering including cost of materials, labour charges, hom of machineries complete as per specifications. deep 0.91m no 8 32 it no 11.40 page no. 74 ksrb 12-5.3 : constructing brick masonry circular type manhole 1.22 m internal dia at bottom 1.68m deep and 0.56m dia at top with table moulded non-modular bricks of 50 class designation 50 in cement mortar 1:4, inside cement plaster 12mm thick with cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete m 10 using 40mm and downsize granite metal and making necessary channel in cement concrete m 15 with 20mm and downsize granite metal finished with a floating coat of neat cement, with s.f.r.c. cover and frame (heavy duty, hd-20 grade designation) 560 mm internal diameter confirming is:12592, total weight cover and frame to be not less than 182 kg, fixed in cement concrete m 15 20mm and downsize broken granite metal, providing and removing centering, shuttering including cost of materials, labour charges, hom of machineries complete as per specifications.-- deep 2029m no 2 33 it no 12.112.2 page no. 90 providing stoneware gully trap of approved quality and make fixing in m-15 and plastering with cm 1:3 wherever necessary.( rate includes cost of all materials, fixtures and lead). (bangalore sr 2018-19, item 12.112, page 90)size 15cm x 10 cm no 12 34 it no 12.116.4 page no. 90 providing and fixing to wall, ceiling and floor unplasticised pvc 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, hom and testing complete as per specifications.(bangalore sr 2018-19, item 12. 116, page 90)-200 mm dia mtr 150 35 13.86.3/ pg. 99 providing and fixing chorinated poly venyl chloride (cpvc) pipes conforming to is 15778, having thermal stability for not and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc.,) mtr 480 36 it no 13.25 page no. 93 ksrb-13-6.1-1 : providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and hom of equipments with all leads complete as per specifications. no 39 37 mr providing and fixing amul trap as per standard detail drawing provided. no 15 38 34.6.4/ pg.254 providing and laying reinforced cement concrete pipe np3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. specifications. no. ksrb 1000, 2300 most specification no.1000 / 2300 - - 750mm. dia mtr 250 39 13.78/ pg.96 ksrb-13-11.1 : providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, hom of equipments and testing complete as per specifications. (for 1000 litre capacity) as per is 12701 1996. specification no. kbs 13.22 no 5 40 13.76/ pg.96 ksrb-13-10.1 : providing and fixing to wall, ceiling and floor unplasticised pvc pipes 10.00kgf/sq.cm working pressure 16mm outside diameter chemp plast / wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, hom of equipments and testing complete as per specifications. mtr 585 41 18.47/ pg.140 ksrrb m200-24. dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials, stacking serviceable and unserviceable materials separately complete as per specifications. cum 75.9 42 2.3/ pg.6 ksrb 2-2.1 : earthwork excavation for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m. after breaking of clods complete as per specifications. cum 196.875 43 12.17/ pg.81 ksrb 11-9.3 : providing and fixing white vitreous china clay, flat back back or half stall urinal basin of size 580x380x350mm in the range of three with 10 litres p.v.c. automatic flushing cistern, c.i. / m.s. brackets, standard flush pipe and c.p. brass spreaders with brass unions and g.i. clamps c.i. trap with outlet grating and other couplings in c.p. brass, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. specification no. kbs 11 specification no. kbs 11 no 4 44 12.30/ pg.83 ksrb 11-11.8: providing and fixing white vitreous china clay, surgeon type wash basin size 660x460mm with a pair of 15mm c.p. brass pillar taps with pair of below operated levers, c.i. /m.s. brackets, 32 mm c.p. brass waste of standard pattern, including brass stop cock, 32mm pvc connection painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. specification no. kbs 11 no 4 45 12.2/ pg.79 ksrb 11-2 : providing and fixing white vitreous china clay, water closet orissa pattern of of size 580 x 440 mm with integral type footrests, 100mm s or trap, 10 litre low level, p.v.c. flushing clistern (all are approved make) with fittings, c.i. / m.s. brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. no 4 46 12.5/ pg.79 ksrb 11-5 : providing and fixing white vitreous china clay, water closet european type (pedestal type, p-trap) with black solid plastic seat and lid, c.p. brass hings, rubber buffers. 10 litre low level, p.v.c. flushing clistern (all are approved make) with fittings, c.i. / m.s. brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. no 4 47 38.66/ pg.319 engineerd wood plastic composite(wpc) door frames with cross section of 75x125mm complete as per specification--frame mtr 40.8 48 38.67/ pg.319 engineerd wood plastic composite(wpc) door frames with cross section of 55x110mm complete as per specification--shutter sqm 10.8 49 8.4/ pg.48 ksrb 8.5 : providing and laying cinder concrete in cement 1:15 (1 cement : 15 cinder of 12.5mm nominal size) on terraced roof or sunken slabs, laid to slope compacting. including cost of materials, labour, curing complete as per specifications. cum 6.5 50 14.36.2/ pg.108 ksrb-14.14-5: providing ceramic tiles of approved make, shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing using white cement using colour pigment, including cost of materials, labour, curing, complete as per specifications. 30*30--6mm sqm 82 51 10.2/ pg.68 ksrb 10.3: providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc., consisting of following application. (a) applying and grouting a slurry coat of neat cement using 2.75 kg./sqm of cement admixed to with proprietary water proofing compound conforming to is:2645 over the rcc slab after cleaning the surface before treatment. (b) laying cement concrete using broken brick bats 25mm to 100mm size with 50 of cement mortar 1:5 admixed with proprietary water proofing compound conforming is:2645 over 20mm thick layer of cement mortar 1:5 admixed with proprietary water proofing compound to required slope and treating similarly the adjoining walls uptp 300 mm height including rounding off junctions of walls and slabs. (c) after two days of proper curing, applying s second coat of cement lurry admixed with proprietary water proofing compound (d) finishing the surface with 20mm thick jointless cement mortar of mix 1:4 admixed with proprietory water proofing compound and finally finishing the surface with trowel and neat cement slurry and making of 300x300mm square. (e) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test including cost of materials, labour complete as per specifications. sqm 83.75 52 1.2.1/ pg.2 supplying heavy gauge pvc conduit pipe mm dia ....... mm thick confirming to is 2509 with suitable size bends, metal/pvc junction boxes, adhesive paste etc., and running before concreting the slab. the conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using pvc end enclosures, run with 18swg gi fish wire wherever necessary mtr 100 53 1.2.2/ pg.2 supplying heavy gauge pvc conduit pipe mm dia ....... mm thick confirming to is 2509 with suitable size bends, metal/pvc junction boxes, adhesive paste etc., and running before concreting the slab. the conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using pvc end enclosures, run with 18swg gi fish wire wherever necessary mtr 250 54 1.2.3/ pg.2 supplying heavy gauge pvc conduit pipe mm dia ....... mm thick confirming to is 2509 with suitable size bends, metal/pvc junction boxes, adhesive paste etc., and running before concreting the slab. the conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using pvc end enclosures, run with 18swg gi fish wire wherever necessary mtr 150 55 1.2.4/ pg.2 supplying heavy gauge pvc conduit pipe mm dia ....... mm thick confirming to is 2509 with suitable size bends, metal/pvc junction boxes, adhesive paste etc., and running before concreting the slab. the conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using pvc end enclosures, run with 18swg gi fish wire wherever necessary mtr 30 56 1.5.1/pg.3 supplying and fixing pvc/metal conduit deep junction box each 7 57 1.5.2/pg.3 supplying and fixing pvc/metal conduit deep junction box each 9 58 1.5.3/pg.3 supplying and fixing pvc/metal conduit deep junction box each 14 59 1.6.1/pg.3 supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. each 4 60 1.6.2/pg.3 supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. each 2 61 1.6.3/pg.3 supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. each 5 62 1.6.4/pg.3 supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. each 6 63 1.6.5/pg.3 supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. each 3 64 1.6.6/pg.3 supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. each 5 65 1.6.7/pg.3 supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. each 5 66 1.6.8/pg.3 supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. each 5 67 2.3.1/pg.5 wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments. mtr 378.8 68 2.3.2/pg.5 wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments. mtr 959 69 2.3.3/pg.5 wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments. mtr 800 70 2.3.4/pg.5 wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments. mtr 22 71 2.3.5/pg.5 wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments. mtr 24 72 2.3.6/pg.5 wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments. mtr 154 73 2.3.7/pg.5 wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments. mtr 6 74 3.3.1/ pg.9 supplying and fixing surface/flush mounting unbreakable pvc modular box suitable for mounting modular switch plates with due groove cutting in brick/c.c wall, including necessary rawl plugs, machine/nf screws etc., complete. each 3 75 3.3.2/ pg.9 supplying and fixing surface/flush mounting unbreakable pvc modular box suitable for mounting modular switch plates with due groove cutting in brick/c.c wall, including necessary rawl plugs, machine/nf screws etc., complete. each 4 76 3.3.3/ pg.9 supplying and fixing surface/flush mounting unbreakable pvc modular box suitable for mounting modular switch plates with due groove cutting in brick/c.c wall, including necessary rawl plugs, machine/nf screws etc., complete. each 6 77 3.3.4/ pg.9 supplying and fixing surface/flush mounting unbreakable pvc modular box suitable for mounting modular switch plates with due groove cutting in brick/c.c wall, including necessary rawl plugs, machine/nf screws etc., complete. each 8 78 3.3.5/ pg.9 supplying and fixing surface/flush mounting unbreakable pvc modular box suitable for mounting modular switch plates with due groove cutting in brick/c.c wall, including necessary rawl plugs, machine/nf screws etc., complete. each 25 79 3.3.6/ pg.9 supplying and fixing surface/flush mounting unbreakable pvc modular box suitable for mounting modular switch plates with due groove cutting in brick/c.c wall, including necessary rawl plugs, machine/nf screws etc., complete. each 2 80 3.5.1/ pg.9 supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/pvc box. each 2 81 3.5.2/ pg.9 supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/pvc box. each 6 82 3.5.3/ pg.9 supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/pvc box. each 2 83 3.5.4/ pg.9 supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/pvc box. each 4 84 3.5.5/ pg.9 supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/pvc box. each 6 85 3.6.1/ pg.10 supplying and fixing of modular switch and connected accessories on existing modular switch plate as per is 3854 and is 1293. each 8 86 3.6.2/ pg.10 supplying and fixing of modular switch and connected accessories on existing modular switch plate as per is 3854 and is 1293. each 6 87 3.6.3/ pg.10 supplying and fixing of modular switch and connected accessories on existing modular switch plate as per is 3854 and is 1293. each 10 88 7.2.1/ pg.46 supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230v 50hz, ac supply complete. each 3 89 7.2.2/ pg.46 supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230v 50hz, ac supply complete. each 3 90 7.4.1/ pg.46 supplying of ceiling fan with capacitor rating as per guideline of bee 5 star rating and is:374/79 and also comply with is:1709/1984 with latest amendment, rated voltage 220 v/ 50 hz, rated power input 48 w +/- 10 , rated current as per is:374/79, rated power factor 0.9 lagging(min), rated speed 350 +/- 10 rpm, rated air delivery 210 +/- 10 cubic meter minimum, rated service value = 4.2 cmm / watt, three blades of blade leaf 1.05 mm thick aluminium alloy sheet, class b motor insulation, bearing two ball bearings, top 6202, bottom 6201 , as per is specification, motor wdg. temp rise shall not exceed 75 deg c over and ambient of 40 0c by resistance method at 245 volts, insulation resistance shall not be less than two mega ohms (2 m ohms), leakage current should not exceed 210 micro amp, power input, wattand current , air delivery and fan speed as per is:374/1979 with latest amendment, 2 year manufacturer warranty. each 15 91 7.4.2/ pg.46 supplying of ceiling fan with capacitor rating as per guideline of bee 5 star rating and is:374/79 and also comply with is:1709/1984 with latest amendment, rated voltage 220 v/ 50 hz, rated power input 48 w +/- 10 , rated current as per is:374/79, rated power factor 0.9 lagging(min), rated speed 350 +/- 10 rpm, rated air delivery 210 +/- 10 cubic meter minimum, rated service value = 4.2 cmm / watt, three blades of blade leaf 1.05 mm thick aluminium alloy sheet, class b motor insulation, bearing two ball bearings, top 6202, bottom 6201 , as per is specification, motor wdg. temp rise shall not exceed 75 deg c over and ambient of 40 0c by resistance method at 245 volts, insulation resistance shall not be less than two mega ohms (2 m ohms), leakage current should not exceed 210 micro amp, power input, wattand current , air delivery and fan speed as per is:374/1979 with latest amendment, 2 year manufacturer warranty. each 14 92 7.8.6/ pg.47 supplying oftr invertor type split air conditioners suitable for operation on a/c supply single phase 50 hz 230 volts with hermetically sealed inverter compressor with air cooled condenser, latest r410a / r-32 refrigerant fan motor, start and run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit. the condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ pvc copper cable and a battery operated wireless remote unit. including installation charges each 3 93 7.9.3/ pg.47 supply erection, testing, commissioning of cassette type split air conditioners suitable for operation on single/three phase ac supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run , relay and over load protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including battery operated cordless unit. including installation charges each 3 94 12.3.1/ pg.64 supplying of ......feet - pvc batten with integrated led tube .....w with high quality diffuser with life of 25000 burning hours and 70 lumen maintenance with cri > 80. power input: 220-240v @ 50/60hz and power factor >0.9 along with ce approved. 2 years warranty against any manufacturing defect working under standard electrical condition. each 8 95 12.3.2/ pg.64 supplying of ......feet - pvc batten with integrated led tube .....w with high quality diffuser with life of 25000 burning hours and 70 lumen maintenance with cri > 80. power input: 220-240v @ 50/60hz and power factor >0.9 along with ce approved. 2 years warranty against any manufacturing defect working under standard electrical condition. each 8 96 12.3.3/ pg.64 supplying of ......feet - pvc batten with integrated led tube .....w with high quality diffuser with life of 25000 burning hours and 70 lumen maintenance with cri > 80. power input: 220-240v @ 50/60hz and power factor >0.9 along with ce approved. 2 years warranty against any manufacturing defect working under standard electrical condition. each 7 97 12.4.1/ pg.64 supplying of recess mounting non integrated type led down light ...... w luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, led of power/cob with cct 6500 degree k, cri> 70. efficacy >100 lumen per watt, 120degree beam spread, life> 25000 burning hours and compliance to is 10322/iec 60598, lm 79 and lm 80. the lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. leds are driven by hf electronic driver integrated in a separate control gear assembly., with pf > 0.95, power loss should < 5 of lamp wattage., short circuit and open circuit protection to be integrated in the circuit, thd less than 20, life as per lm 79. the operating input voltage should be between 130 to 275 volts. bis approved and tested by nabl/cpri accredited laboratory with 2 years warranty against any manufacturing defect working under standard electrical condition. each 4 98 12.4.2/ pg.64 supplying of recess mounting non integrated type led down light ...... w luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, led of power/cob with cct 6500 degree k, cri> 70. efficacy >100 lumen per watt, 120degree beam spread, life> 25000 burning hours and compliance to is 10322/iec 60598, lm 79 and lm 80. the lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. leds are driven by hf electronic driver integrated in a separate control gear assembly., with pf > 0.95, power loss should < 5 of lamp wattage., short circuit and open circuit protection to be integrated in the circuit, thd less than 20, life as per lm 79. the operating input voltage should be between 130 to 275 volts. bis approved and tested by nabl/cpri accredited laboratory with 2 years warranty against any manufacturing defect working under standard electrical condition. each 6 99 12.4.3/ pg.64 supplying of recess mounting non integrated type led down light ...... w luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, led of power/cob with cct 6500 degree k, cri> 70. efficacy >100 lumen per watt, 120degree beam spread, life> 25000 burning hours and compliance to is 10322/iec 60598, lm 79 and lm 80. the lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. leds are driven by hf electronic driver integrated in a separate control gear assembly., with pf > 0.95, power loss should < 5 of lamp wattage., short circuit and open circuit protection to be integrated in the circuit, thd less than 20, life as per lm 79. the operating input voltage should be between 130 to 275 volts. bis approved and tested by nabl/cpri accredited laboratory with 2 years warranty against any manufacturing defect working under standard electrical condition. each 4 100 12.6.2/ pg.65 supply of round/square recess/surface mounted rolling type led down light with .......w gu 10 led lamp rib fabricated from die cast aluminium with white powder coated prewired to mains connector and has swiveling unit of aluminium die cast eye ball and led lamp position retained by circular wire spring, with life of 25000 burning hours and 70 lumen maintenance with cri > 80. power input: 220-240v @ 50/60hz and power factor >0.9 along with ce approved. 2 years warranty against any manufacturing defect working under standard electrical condition each 20 101 12.9.1/ pg.67 supply of round/square recess/surface mounted rolling type led down light with .......w gu 10 led lamp rib fabricated from die cast aluminium with white powder coated prewired to mains connector and has swiveling unit of aluminium die cast eye ball and led lamp position retained by circular wire spring, with life of 25000 burning hours and 70 lumen maintenance with cri > 80. power input: 220-240v @ 50/60hz and power factor >0.9 along with ce approved. 2 years warranty against any manufacturing defect working under standard electrical condition each 1 102 12.9.2/ pg.67 supply of round/square recess/surface mounted rolling type led down light with .......w gu 10 led lamp rib fabricated from die cast aluminium with white powder coated prewired to mains connector and has swiveling unit of aluminium die cast eye ball and led lamp position retained by circular wire spring, with life of 25000 burning hours and 70 lumen maintenance with cri > 80. power input: 220-240v @ 50/60hz and power factor >0.9 along with ce approved. 2 years warranty against any manufacturing defect working under standard electrical condition each 1 103 12.9.3/ pg.67 supply of led floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. lamp compartment comprising of anti glare clear diffuser with injection moulded polycarbonate/clear glass material, delivering superior light output. rated life burning hrs 50000 hr @ lumen maintenance of 70, cct > 5500k, ip 66 optical and electrical compartment and impact resistance of complete luminaire > ik08. power factor >0.9 with mains, surge protection- min 5kv along with over voltage/ overload, short circuit/ miss-wiring protection. compatible for pole mouting with outer dia of 40mm to 50mm. each 1 104 12.9.4/ pg.67 supply of led floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. lamp compartment comprising of anti glare clear diffuser with injection moulded polycarbonate/clear glass material, delivering superior light output. rated life burning hrs 50000 hr @ lumen maintenance of 70, cct > 5500k, ip 66 optical and electrical compartment and impact resistance of complete luminaire > ik08. power factor >0.9 with mains, surge protection- min 5kv along with over voltage/ overload, short circuit/ miss-wiring protection. compatible for pole mouting with outer dia of 40mm to 50mm. each 1 105 12.14.1/ pg.69 supplying and fixing of slim box fitting, made out of crca sheet metal body with locking type holder completely wired. excluding ballast and flouresent tube. supplying and fixing of slim box fitting, made out of crca sheet metal body with locking type holder completely wired. excluding ballast and flouresent tube.
