supply of op works stores. -(i) cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 (make: birla gold/ambuja/ ultratech/acc/jk/dalmia). (ii) coarse sand free from vegetation (iii) coarse aggregate 20mm graded (iv) coarse aggregate 40mm graded (v) coarse aggregate 63-90 mm graded (vi) stone for rr massonry (vii) mild steel bars of size 8 mm dia conform to is 432 (part 1) 1982 (tmt bar) (make- tata/ sail/ jsw ) (viii) mild steel bars of size 10 mm dia conform to is 432 (part 1) 1982 (tmt bar) (make- tata/ sail/ jsw ) (ix) mild steel bars of size 12mm dia conform to is 432 (part 1) 1982 (tmt bar) (make- tata/ sail/ jsw ) (x) mild steel bars of size 16 mm dia conform to is 432 (part 1) 1982 (tmt bar) (make- tata/ sail/ jsw ) (xi) ms binding wire : make (tata/ sail/ jsw) (xii) wooden plank for shuttering ii class wood of size 3.0 x0.3 x0.026 m (xiii) wooden scantling various size (xiv) wooden log for props of size 3.2 mtr long, 100 mm dia (xv) ms frame work for roof trusses, purlin, rafter, wind tie, and ms plate etc all as directed (make- tata/ sail/ jsw ) (a) ms angle 40x40x6 mm for cleat kg 67.50 (b) ms rhs of 80x40x3.2 mm kg 2025 (b) ms rhs of 50x25x2.9 mm kg 1065 (b) ms rhs of 96x48x3.2 mm kg 2800 (e) ms plate 8 mm thick kg 1780 (e) ms plate 10 mm thick kg 525 (e) ms plate 12 mm thick kg 635 (xvi) ms nuts and bolts of length 100mm thread suitable for 10 mm dia nuts including two numbers of washer and 25 mm of shank and two nos of washers 3 mm thick complete all as directed kg 115 (xvii) ms flat 40x5 thick for wind tie (make- tata/ sail/ jsw ) kg 525 (xviii) iron welding rod conforming to is 814-2002 (isi marked) 3.15 mm thick : 100 nos pkt 25 (xix) water proofing compound conform to is 2645- 2003. make : pidilite/ dr fixit/fevicol kg 195 (xx) quick setting compound (make: pidilite/fevicol/ quick fix) kg 1920 (xxi) cement base paint (scowcem) make : berger/asiannerolac kg 250 (xxii) oil bound distemper (washable quality) of proprietary brand of ( make : berger/asian/nerolac) kg 75 (xxiii) birla white wall care putty (water resistant white cement) ( make : berger/asian/nerolac) kg 50 (xxiv) ppgi roofing sheet 10x3 long and thickness 0.63 mm with grard film. the ppgi sheet shall have min coating of 4-5 micron epoxy primer and and 18-20 micron polyester top coat. the top of 30-40 micron on the finished surface only for protection , the pre coated gi sheet confirm to is-14246-1995 ( make : uniix/jindal mectec or equvalent brand with is specification). nos 170 (xxv) pre painted galvanum aluminium zink coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa of size 10x3 ( make : uniix/jindal mectec or equvalent brand) sqm 20 (xxvi) synthetic enamelied paint any colour as directed conforming to is 5-2004 ( make : berger/asian/nerolac) ltr 25 (xxvii) painting brush 4 (isi marked) nos 20 (xxviii) nails various sizes kg 25 (xxix) self taping steel screw half thread with rawl plug of 1 1/2 size (isi marked) (100 nos/pkt) pkt 25 (xxx) aluminium door 1000 mm x2100 double shutter with frame and as directed (make : jindal/hindalco) nos 5 (xxxi) aluminium window triple track (2 track glass and 01 track wire mesh) with frame of size 1000 mm x1000 mm including all fittings and as directed (make : jindal/hindalco) nos 15 (xxxii) aluminium ventilator 1200x600 mm fixed type with glass (4mm thick) thick and as directed (make : jindal/hindalco) nos 20 (xxxiii) ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick (make : kajaria / johnson / orient) 1st quality conform to is-156- 2006. nos 620 (xxxiv) white cement conform to is-8042/1989 (make : acc/ birla white/ ambuja). kgs 75 (xxxv) curtain arrangement drapery and rod made of 25mm dia and 1600mm long, pre-coated ms pipe with fancy type ends suitable fixing arrangement for the curtain rods shall be made and supplied to hold the curtain rods alongwith fixing arrangement complete isi marked. nos 15
