supply of workshop equipments.-all geared precision lathe machine all geared precision lathe machine with hardened guide ways, hardened and profile ground head stock gears complete with electric motor, r/f switch, v belts, 2mt, centers with centre bush, inch and mm gears, oil can, spanner and allen key set and instruction manual. it should have the following specifications : bed length: 1650 mm centre height: 175 mm swing over bed : 335 mm swing over cross slide: 175 mm swing over saddle: 230 mm distance between centre : 800 mm movement of cross slide: 200 mm bed type: 2 flat and 2v bed width:254 mm type and size of spindle nose: a 2 size 4 taper bore in centre sleeve: mt-4, mt-5 spindle bore: 42 mm spindle diameter: 45 mm taper bore in spindle sleeve: mt-4 travel of tools slide: 140 tool shank section: 20mm x 20mm no. and ranges of speeds : 8/45 to 938 rpm no. of feeds : 32 longitudinal feeds per revolution: 0.068 to 1.02 mm /rev transverse feeds per revolution: 0.012 to 0.185 mm /rev motor hp:2 hp/1440 rpm accessories: face plate, steady rest, follow rest, machine lamp, electric coolant pump with tank and fittings, taper turning attachment, quick change tool post with 5 tool holders, chuck flange, 10 x 4 jaw dog chuck, 6 1/2 x 3 jaw true chuck, 8 x 3 jaw true chuck, revolving centre. universal milling machine with longitudinal feed automatic table : working surface:1100 x 280 mm no. of t-slot and size: 3/m 12 distance between t-slots: 75 mm table swivel: 45 range: longitudinal feed (automatic): 580 mm longitudinal feed by hand: 650 mm cross feed by hand: 225 mm vertical feed by hand: 400 mm max. safe wt. on table: 300 kg spindle: spindle arbour: 25.4 mm spindle nose taper: iso 40 distance from spindle to table min. - max.: 0-275 mm throat distance with vertical head : 275 mm no. of spindle speeds: 9 range of spindle speeds: 60 to 1000 rpm spindle bearing front: 32211 spindle bearing rear: 32208 feeds: no. of feeds: 6 longitudinal feed: 10, 16, 25, 46, 71, 111 mm / min drive: spindle motor: 2 hp table feed motor: 0.5 hp coolant pump motor: 0.1 hp accessories: swivel base milling machine vice 100 mm; universal dividing head with indexing attachment 100mm with 10mm true chuck; rotary indexing table; slotting attachment; machine lamp; iso40 milling adaptor; 8 collets ranging from 4 to 25.4; clamping kit hydraulic hacksaw machine complete with standard accessories: electric motor, starter, hydraulic pump, mechanical coolant pump with fittings, v belts, right angle vice and gauge stop it should have the following technical specifications: cutting capacity (round bar ) : 300 mm cutting capacity (square bar ) : 225 mm blade size : 500 mm electric motor : 2 hp 1 pedestal grinding machine complete with grinding wheel (one fine and one coarse)at each end , fitted with eye shield, starter, wheel guard, standard tool rest specifications: wheel size: 180 x 20 mm wheel centre distance: 445 mm centre height: 935 mm motor: 0.5 hp, 3ph rpm : 3000 1 pillar drilling machine drilling capacity (in steel) : 25 mm column dia : 87.60 mm centre of spindle to column : 250 mm max spindle to table : 650 mm max spindle to base : 1050 mm taper in spindle : mt-3 spindle travel : 185 mm no. of speed : 8 range of speed : 73 to 1800 rpm table size : 345 x 345 mm base size : 625 x 420 mm overall height with guard : 1675 mm v- belt section : b-52 elec. motor - 1 h.p ,1440 rpm accessories: drill chuck 0- with arbour drill sleeve drill vice 100 mm elec. coolant pump with tank and fittings machine lamp
