Active tenders in Kailwood Planks

state plan-2020-2021- replacing the wooden planks of shutters of check dam at meetna-koottilamukku with ms sheet shutters

procurement of soft pine wood planks for ciw of meg and centre bangalore meg and centre out of fp and tg for the fy 2021 22

supply of materials like well dried, best quality teakwood (valsadi) planks etc. as mentioned in boq

tender for set of panel for eog ac garib rath coaches, as per drawing/ spec. no.:rdso/pe/spec/ac/0200-2020,rev-0, packing instruction: electrical power panels : powerpanels to be covered with polythene sheet of 1 mm thickness. on front side ofpanels proper protection with corrugated sheet /thermocol to be provided andthen the panels to be packed in wooden cage as per details below. bottom frame tobe made of wooden planks 20 mm thick and should have support of atleast 3 woodenbattons of size 100x100 mm of suitable length. wooden cage of 20x100mm of suitablelength with wooden strips to be provided. gap between each strips should not bemore than 100mm.

procurement of mango wood planks .

tender for distribution box (consisting of four nos.)for ng coaches., as per drawing:ln71104, packing instruction: alternator,rru, erru & accessories, transformer,bulkinverters , battery, charger, self priming monoblock pump, inverter, change overcontrol box etc: suitably covered with biodegradable transparent polythene andpacked in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitablelength to facilitate lifting by fork lifter. each panel to be packed in wooden cageof suitable dimensions made out of wooden strips of 20x100mm size. gap betweeneach strip should not be more then 100mm. the material used for productpackaging shall be eco-friendly.a list should be pasted on each wooden cageshowing order no, pl no, description of the item, drg. no/ spec. no ,qty, firms name &address and date of despatch etc.

tender for teak wood plank, non-structural gr.i size 9 x 1-1/2 x 2.25 mtrs long , sample must be approvedby consignee before bulk supply.confirming is:1331/1971. (shop no.05) .

supply of time switch assembly comprising of 2nos of timer switch with daily setting similar to l&tcatalogue reference no j648131 of 01.01.17(fm quartz) ,2nos of 3pole 32a power contactor confirming to is13947/p4/1993 or latest similar to l&t catalogue reference no cs94111 of 01.01.17 ,2nos of 40a four pole (mcbtype) isolator confirming of is 13947/p3/1993 or latest,1no of neutral link etc, 1no of earth link etc. suitable ratedcontrol fuses all duly pre wired and mounted on an appropriate sized well seasoned wooden plank of thicknessnot less than 12mm and duly housed into and powder coat finished enclosure of size not less than 300mmx450mm x 300mm and made of 2mm thick steel complete and provision of same onto the wall or elsewhereusing suitable fixing arrangement.

supply of jack pulley and scaffolding on rent, supply of tractor- trolley set on rent, plastic water tank, wooden planks etc. as mentioned in boq

replacement of broken and damaged wooden plank at n-w side of the wooden jetty under watgunge pumping station.

tender for distribution box (consisting of four nos.)for ng coaches., as per drawing:ln71104, packing instruction: alternator,rru, erru & accessories, transformer,bulkinverters , battery, charger, self priming monoblock pump, inverter, change overcontrol box etc: suitably covered with biodegradable transparent polythene andpacked in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitablelength to facilitate lifting by fork lifter. each panel to be packed in wooden cageof suitable dimensions made out of wooden strips of 20x100mm size. gap betweeneach strip should not be more then 100mm. the material used for productpackaging shall be eco-friendly.a list should be pasted on each wooden cageshowing order no, pl no, description of the item, drg. no/ spec. no ,qty, firms name &address and date of despatch etc.

tender for starter battery charger 24v/25a, as per drawing:/specification edts421,rev-0,packing instruction: alternator,rru, erru & accessories, transformer,bulk inverters ,battery, charger, self priming mono block pump, inverter, change over controlbox etc: suitably covered with biodegradable transparent polythene and packed inwooden cage: bottom frame to be made of wooden planks 20mm thick & should havesupport of at least 3 wooden battons of size 100x100mm of suitable length tofacilitate lifting by fork lifter. each panel to be packed in wooden cage of suitabledimensions made out of wooden strips of 20x100mm size. gap between each stripshould not be more then 100mm. the material used for product packaging shall beeco-friendly.a list should be pasted on each wooden cage showing order no, pl no,description of the item, drg. no/ spec. no ,qty, firms name & address and date ofdespatch etc.

supply installation, testing &commissioning of microprocessor basedsmart switch board cabinet complete with all accessories (mssbc) (on board type),as per drawing/ spec. no.: edts419,rev-0, packing instruction: electrical panels to be protectedwith transparent biodegradable polythene bag/sheets thickness of 0.1 mm or anantistatic bag of 350 to 400 gauge (100 micron approx.) on all sides of panel & panelshall be packed in transport worthy wooden cage. bottom frame to be made ofwooden planks 20mm thick & should have support of at least 3 wooden batons ofsize 100x100mm of suitable length to facilitate lifting by fork lifter & mounting to befixed with nut & bolts. each panel to be packed in transport worthy wooden cageof suitable dimensions made out of wooden strip of 20x100 mm size. gap betweeneach strips should not be more then 100mm.a list should be pasted on each woodencage showing order no, pl no, description, drg /spec. no, qty, firm name & address,consignee name, date of dispatch, top bottom arrow mark etc.

supply, installation, testing &commissioning of microprocessor basedsmart switch board cabinet complete with all accessories (mssbc) (underslungtype), as per drawing: edts422,rev-0,type-2., packing instruction: electrical panels to beprotected with transparent biodegradable polythene bag/sheets thickness of 0.1mm or an antistatic bag of 350 to 400 gauge (100 micron approx.) on all sides of panel& panel shall be packed in transport worthy wooden cage. bottom frame to bemade of wooden planks 20mm thick & should have support of at least 3 woodenbatons of size 100x100mm of suitable length to facilitate lifting by fork lifter &secure properly with suitable packing to avoid in-transit damage. each panel to bepacked in transport worthy wooden cage of suitable dimensions made out ofwooden strip of 20x100 mm size. gap between each strips should not be more then100mm.a list should be pasted on each wooden cage showing order no, pl no,description, drg /spec. no, qty, firm name & address, consignee name, date ofdispatch, top bottom arrow mark etc.

tender for 7.5 kw underslung battery charger for narrow gauge coaches, as perdrawing/specification : edts416,rev-0, packing instruction: alternator,rru, erru & accessories,transformer,bulk inverters , battery, charger, self priming monoblock pump,inverter, change over control box etc: suitably covered with biodegradabletransparent polythene and packed in wooden cage: bottom frame to be made ofwooden planks 20mm thick & should have support of at least 3 wooden battons ofsize 100x100mm of suitable length to facilitate lifting by fork lifter. each panel tobe packed in wooden cage of suitable dimensions made out of wooden strips of20x100mm size. gap between each strip should not be more then 100mm. the materialused for product packaging shall be eco-friendly.a list should be pasted on eachwooden cage showing order no, pl no, description of the item, drg. no/ spec. no,qty, firms name & address and date of despatch etc.

tender for concealed wooden switch board of size 8 inches x 6 inches x 40mm having good quality wood,well finished and varnished with 10mm thick bottom wooden plank should not have more than one jointlongitudinally.

tender for connection box 1 set consisting of 04 nos, as per drawing: ln71103, packinginstruction: alternator,rru, erru & accessories, transformer,bulk inverters , battery,charger, self priming monoblock pump, inverter, change over control box etc:suitably covered with biodegradable transparent polythene and packed in woodencage: bottom frame to be made of wooden planks 20mm thick & should have supportof at least 3 wooden battons of size 100x100mm of suitable length to facilitatelifting by fork lifter. each panel to be packed in wooden cage of suitabledimensions made out of wooden strips of 20x100mm size. gap between each stripshould not be more then 100mm. the material used for product packaging shall beeco-friendly.a list should be pasted on each wooden cage showing order no, pl no,description of the item, drg. no/ spec. no ,qty, firms name & address and date ofdespatch etc.

tender for self-priming mono-block pump assembly without controller, as perdrawing/specification.: edts186,rev-a ,oga as per annexure-a, packing instruction:alternator,rru, erru & accessories, transformer,bulk inverters , battery,charger, self priming monoblock pump, inverter, change over control box etc:suitably covered with biodegradable transparent polythene and packed in woodencage: bottom frame to be made of wooden planks 20mm thick & should have supportof at least 3 wooden battons of size 100x100mm of suitable length to facilitatelifting by fork lifter. each panel to be packed in wooden cage of suitabledimensions made out of wooden strips of 20x100mm size. gap between each stripshould not be more then 100mm. the material used for product packaging shall beeco-friendly.a list should be pasted on each wooden cage showing order no, pl no,description of the item, drg. no/ spec. no ,qty, firms name & address and date ofdespatch etc.

wooden panelling of town hall renovation of roof of whole town hall building by way of wooden planks ply wood qazigund.

tender for concealed wooden switch board of size 12 inches x 8 inches x 40mm having good quality wood,well finished and varnished, 10mm thick bottom wooden plank should not have more than one joint longitudinally.