Active tenders in Connectors

supply of spare connectors for current measurement unit of medical cyclotron facility.

supply installation testing and commissioning of 720p bullet camera with 1/3.2-inch cmos, total sensor pixels 1952 x 1092 (2mp), builtin ir illuminator with 25 m (82 ft) viewing distance, fully configurable quad streaming, regions of interest and e-ptz, sensitivity-0.24 lx,0.0 lx (ir), dynamic range, true day/night, electronic shutter, idnr, blc, intelligent defog, privacy maskingfour independent areas, fully programmable, full duplex / half duplex audio streaming, varifocal 3 to 10 mm lens, 3-axis adjustment (pan/tilt/rotation), password protection, onvif profile s, ip66, ik08, ce, fcc, ul certified. the housing, mounts, lens etc should be of same make as of camera offered. using , connectors, lens, camera mounts, power supply and all ancillary equipment andall accessories as per technical specification and should be ul /fcc listed. the camera, software, storage should be of the same make for seamless integration with each other. with networking and essential cablings and arrangements within city limits

81203/obm mariner/engr/0091.-ball bearing part no 30160491 clamp part no 54853798 forward gear part no 438129441 fuel connector - eng end part no 228537361 ignition coil part no 160642 pinion gear part no 43161381 prop nut part no 11161471 propeller shaft part no 44195131 water pump repair kit part no 853792a1 drag link assy part no 853824 a1 fuel line assy part no 32881807 rod snap part no 176431

procurement of various items.-(a) 38485l25 hexane ltr-20 (b) 8mtb5.9113.020 cowl cover ea-07 (c) 5a/4124 blower air portable type-d 240/250v ac/dc ea-02 (d) 8at-9108-30 wrench for plug connector ea-05 (e) 8at-9101-210 mirror rimmed

micro d connectors as per list 6.

procurement of mil standard m83723 connectors or equivalent.

tender for set of connectors for mrvc-ii emu rakes as per drg. no. - wr/sk/e/poh/1098 .

connectors.

tender for universal write blocker kit (ide/sata/usb/firewire/pcie) with cables and connectors as perannexure-i .

supply of adapters, connectors and calibration kit.

procurement of spare terminal connectors of 400kv switchyard at bgtpp.

procurement of plant design, supply, installation, testing and commissioning of goods for upgradation, expansion and strengthening of existing post-harvest infrastructure project at rohru, district shimla (hp)-1 pvc insulated cables (light duty) for - working voltage up to and including 1100 volts 2 pvc insulated cables (heavy duty) voltage up to 1100 volts 3 pvc insulated cables (heavy duty) voltage 3.3 kv to 11 kv 4 guide for marking of insulated conductors 5 code of practice for installation maintenance of power cables up to including 33 kv rating 6 code of practice for earthing 7 recommendations on safety procedures and practices in electrical work - part general 8 recommendation on safety procedures and practices in electrical work - part life saving techniques 9 code of practice for installation maintenance of induction motors 10 code of practice for selection, installation maintenance of switchgear and control gear 11 code of practice for selection, installation and maintenance of transformers 12 code of practice for electrical wiring 13 guide for testing three-phase induction motors 14 xlpe cables for working voltage up to and including 1100 volts 15 xlpe cables for working voltage up to and including 33 000 volts 16 general requirements for enclosures for accessories for household and similar fixed electrical installations 17 specification for electric power connectors 18 methods of test for cables 19 national electrical code 1. circuit breaker / contactor module detail 2. insulation resistance tests with 1000 volt megger 3. between each phase of bus - mega ohm 4. between each phase and earth- mega ohm 5. dc and ac control and auxiliary circuits - mega ohm 6. between each phase of ct/pt and between ct and pt circuits- mega ohm 7. ct check - 8. ct ratio 9. ct secondary resistance 10. ct polarity check 11. check for control alignment and wipe 12. check/ test all releases/ relays 13. check mechanical interlocks 14. check electrical interlocks 15. check switchgear/ control panel wiring 16. check breaker / contactor circuits for 17. closing - local and remote ( wherever applicable) 18. tripping - local and remote ( wherever applicable) 19. opening time of breaker/ contactor 20. closing time of breaker/ contactor

supply of various types and size of lugs, sleeves, connectors, tbs and crimping tools for emd-1 and 8 at wtps. .

supply of emd connectors.

supply of spare cables and connectors as per tender specification at iocl gujarat refinery ,vadodara.

mil std circular connectors.

supply of set of connectors for panel and non panel for wag9 loco to spec.no. clw/es/3/0124/0 [comprisingof 78 items per loco set as per annexure a].

bharanikkavu gp so19/20 remetalling and tarring of burma cottage -kattumukku road inw-3 in bharanikkavu gp- civil works - roads.