Get Sample
Explore our Product/Service and Discover Exclusive Tender Opportunities

Showing results 10 in 20k+ tenders list

DEPARTMENT OF URBAN LOCAL BODIES

Supply Of Waste Container (V3)

  • Location: Etah, Uttar Pradesh

  • Last Date: 22 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614323

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of R1 1Inch Hose 30Mm End Fittings

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614321

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of R1 1.50 Inches Hose 38Mm- 38Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614320

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of R1 0.75 Inches Hose 25 Mm- 25Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614319

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.25 Inches Hose 10Mm- 10Mm St- 90 L500Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614318

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Hose 20Mm- 20Mm St- 90 L-300Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614316

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.25 Inches Hose 16Mm- 16Mm St- 90 L800Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614315

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.75 Inches Hose 25Mm- 25Mm St- 90 L600Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614314

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 1 Inches Hose 30Mm- 30Mm St- 90 L800Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614313

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.75Hose25Mm- 25Mm St- 90 L1200Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614312

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 1.50 Hose 38Mm St- 90 L-1200Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614311

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.25 Inches Hose10Mm- 10Mm St- 90 L1000Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614310

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.50 Inches Hose16Mm- 16Mm St- 90 L-800Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614309

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.50 Inches Hose16Mm- 16Mm St- 90 L1000Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614308

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.75 Inches Hose25Mm- 25Mm St- 90 L800Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614307

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.75 Inches Hose25Mm- 25Mm St- 90L1000Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614305

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.25 Inches Hose 10Mm- 10Mmst- 90 L800Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614304

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.25 Inches Hose10Mm- 10Mmst- 90 L300Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614303

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.25 Inches Hose10Mm- 10Mmst- 90 L1500Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614302

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 0.75 Inches Hose25Mm- 25Mm St- 90L1200Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614301

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 1 Hose 30Mm- 30Mm St- 90L1200Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614300

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of 1.50 Hose 38Mm St- 90 L-1200Mm

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55614298

GeM Tender
More Detail
DISTRICT RURAL DEVELOPMENT AGENCY

Supply Of Handcrafted Showpiece And Statue

  • Location: Etah, Uttar Pradesh

  • Last Date: 29 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55611562

GeM Tender
More Detail
STATE URBAN DEVELOPMENT AGENCY

Construction Of Drainage And Cc From Kuvarpal House To Ram Singh House And Then To Ramprakash House In Mohalla Shivompuri

  • Location: Etah, Uttar Pradesh

  • Last Date: 08 May 2026

  • Amount: 8.82 Lac

Ref. No: 55610414

More Detail
STATE URBAN DEVELOPMENT AGENCY

Construction Work Of Drains And Interlocking From Rekha Sharma House To Sayyad In Mohalla Kheda

  • Location: Etah, Uttar Pradesh

  • Last Date: 08 May 2026

  • Amount: 15.84 Lac

Ref. No: 55610412

More Detail
KARNATAKA NEERAVARI NIGAM LTD

Construction Of Police Chowki Ubhai Asad Nagar At Thana Nayagaon Distt Etah U.P.

  • Location: Etah, Uttar Pradesh

  • Last Date: 29 Apr 2026

  • Amount: 70.92 Lac

Ref. No: 55610266

More Detail
PUBLIC WORKS DEPARTMENT

Repairing And Coloring Work On Koshagar Etah Building Daubal Lock Painsner Bhaban Etc In Fy 2025-26

  • Location: Etah, Uttar Pradesh

  • Last Date: 22 Apr 2026

  • Amount: 13.50 Lac

Ref. No: 55610258

More Detail
PANCHAYAT RAJ DEPARTMENT

Split Air Conditioner, Wall Mount Type (V3) Isi Marked To Is 1391 (Part 2)

  • Location: Etah, Uttar Pradesh

  • Last Date: 27 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55604044

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Branch London Type Specification- Multipurpose Nozzle 500 Lpm 1. Technical Requirements- A-Flow Rate- Selectable- Lpm.- B-Light In Weight And Easy To Handle.- C-Weight Of The Nozzle- 2.5 Kg.- D-The Calibrated Flow Rates Are Easily Selectable Through An Indexed Ring And The Maximum Rate Is Indicated By A Raised Lug.- E-The Stream Patterns Are Also Changed By Rotating The Diffuser Head Ring With Tactile Marking- Straight Jet, Spray And Fog- .- F-Nozzle Should Have Flush Feature For Flushing Any Foreign Items Like Wood Or Stone Etc.- G-Nozzle Should Also Have Metal Partitions Inside To Restrict Entry Of Foreign Particle Of Bigger Size.- H-Nozzle Should Be Having Pistol Grip, Shut Off Ball Valve Opening And Made Of Aluminium Alloy.- I-Nozzle Shall Meet The Operational Requirement As Per En Standard.- J-The Head Is Protected With Polyurethane Bumper Guard. The Elastomers Of Bumper Guard Does Not Melt Under Heat. The Teeth Of Nozzle Should Be Of Steel.- K-It Should Be Of Pok Or Elkhart Or Akron Or Rosenbaur Make.- L-Nozzle Should Have 3 Stream Pattern- Straight Jet, Flash Over And Wide Angle Fog- M-Fog Angle Should Be 130 Degree.- N-Inlet Of The Nozzle Should Of Swivel Inlet To Avoid Any Kinking Of Hose 2. Warranty-Warranty- 1 Years. Service Warranty- 5 Years 3. Pre Dispatch Inspection- A-Pre Dispatch Inspection Shall Be Carried Out At Vendor S Or Oem Site Where All Testing Facilities As Per Relevant Standard Are Available.

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604041

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Fire Extinguisher, As Per Is 15683- 2018- With Latest Amendments- 1. Type-Cartridge Type With 01 Spare Cartridge 2. Extinguishing Media-Powder Based As Per Is- 4308 Or Abc Powder Conforming To Is- 4308 3. Expelling Medium Or Agent-N2 Based- Stored Pressure- 4. Type Of Extinguisher-Low Pressure Extinguisher- Service Pressure 19 Bar- 5. Feature Of Fire Extinguishers-Carrying Handle And Hose Assembly Is Mandatory As Per Clause No. 9.3 And 9.8 Of 6. Class Of Fire For Which Fire Extinguisher Is Suitable- Class-A, B And C 7. Minimum Effective Discharge Time-Minimum 13 Sec- As Per 7.2.1.1 Of Is 15683- 2018- 8. Material Specification For The Body Of Lowpressure Extinguisher- Welded Low Carbon Steel Cylinders As Per Clause No. 9.2.5 Of Is- 15683 9. Powder Based Extinguishing Media-Abc- Mono Ammonium Phosphate 90 Percent- 10. Powder Based Fire Extinguisher Capacity In Kg-06 Kgs. 11. Operating Temperature- Degc- Temperature Range As Mentioned In Clause No.7.1 Of Is 15683- 2018 12. Fire Ratings Of Different Class Of Fires 3A, 89B- Minimum- General Parameters- According To Is 15683- 2018- Latest Amendment- 1. Conformity To Standard- Latest Amendments- 2. Bis Marking Yes 3. Availability Of Test Report From Central Govt. Or Nabl Or Ilac Accredited Lab To Prove Conformity To Specification Availability Of Test Report From Central Govt. Or Nabl Accredited Laboratory Additional Technical Parameters- 1. Marking-Required As Per Clause 10.2 Of Is 15683- 2018 2. Test Reports Test Reports From Central Govt. Or Nabl Accredited Laboratory Shall Be Submitted Along With Supply Otherwise Material Shall Be Rejected. 3. Bis Certificate-Valid Bis Approval Certificate- Is15683- 2018-Consisting Cml License Number Shall Be Submitted Along With Offer. 4. Painting-Body Of The Fire Extinguisher S

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604040

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Fire Extinguisher, As Per Is 15683- 2018- With Latest Amendments- 1. Type-Cartridge Type With 01 Spare Cartridge 2. Extinguishing Media-Powder Based As Per Is- 4308 Or Abc Powder Conforming To Is- 4308 3. Expelling Medium Or Agent-N2 Based- Stored Pressure 4. Type Of Extinguisher-Low Pressure Extinguisher- Service Pressure 19 Bar- 5. Feature Of Fire Extinguishers-Carrying Handle And Hose Assembly Is Mandatory As Per Clause No. 9.3 And 9.8 Of 6. Class Of Fire For Which Fire Extinguisher Is Suitable- Class-A, B And C 7. Minimum Effective Discharge Time-Minimum 13 Sec- As Per 7.2.1.1 Of Is 15683- 2018- 8. Material Specification For The Body Of Lowpressure Extinguisher- Welded Low Carbon Steel Cylinders As Per Clause No. 9.2.5 Of Is- 1568 9. Powder Based Extinguishing Media-Abc- Mono Ammonium Phosphate 90 Percent- 10. Powder Based Fire Extinguisher Capacity In Kg-06 Kgs. 11. Operating Temperature- Degc- Temperature Range As Mentioned In Clause No.7.1 Of Is 15683- 2018 12. Fire Ratings Of Different Class Of Fires 3A, 89B- Minimum- General Parameters- According To Is 15683- 2018- Latest Amendment- 1. Conformity To Standard- Latest Amendments- 2. Bis Marking Yes 3. Availability Of Test Report From Central Govt. Or Nabl Or Ilac Accredited Lab To Prove Conformity To Specification Availability Of Test Report From Central Govt. Or Nabl Accredited Laboratory Additional Technical Parameters 1. Marking-Required As Per Clause 10.2 Of Is 15683- 2018 2. Test Reports Test Reports From Central Govt. Or Nabl Accredited Laboratory Shall Be Submitted Along With Supply Otherwise Material Shall Be Rejected. 3. Bis Certificate-Valid Bis Approval Certificate- Is15683- 2018-Consisting Cml License Number Shall Be Submitted Along With Offer. 4. Painting-Body Of The Fire Extinguisher Shall Be Painted Withp.O. Red Color Conforming To Shade No. 536 Or

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604039

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Co2 Fire Extinguisher 6.5Kg Specification- Specification For Co2 6.5 Kg Capacity Fire Extinguisher- Trolley Mounted- Isi Marked 6.5Kg Capacity Co2 Trolley Mounted Portable Fire Extinguisher Confirming To Is- Having Typical Shape, Showing The Cylinder, Concave Base Shall Be Completed With Following- Technical Data 1. Temperature Working Range Shall Be- 300 C To +550 C 2. Co2 Fire Extinguisher Should Be As Per Is-16018- Latest Revision- . With Isi Mark. 3. Filled Carbon Dioxide Gas Shall Be As Per Is-15222- Latest Revision- . 4. Extinguisher Should Be Provided With Ms Trolley With Solid Rubber Wheels, Handle, Control Discharge M E C H A N I S M With Discharge Hose, Rubber Grip, Hanging Clamp And N O N Metallic Discharge Horn. 5. The Minimum Bursting Pressure Of Discharge Hose- Wire Braided-Shall Be 275 Bar. 6. Extinguisher Should Be Class B, C And Electrical Fires, Fire Rating 55B. 7. Seamless Cylinder Should Be As Per Is 7285- Latest Revision-With Isi Mark And Should Be Approved By Peso. 8. Discharge Valve Should Be Wheel Type As Per Is 3224- Latest Revision-With Isi Mark. 9. Safety Device Should Be As Per Is 5903 And Safety Device Conforming To Is-5903- Latest Revision-Shall Be In-Built In Discharge Valve Conforming To Is-3224. 10. Siphon Tube Should Be Of Brass Alloy No. 2 As Per Is 407. 11. Finishing Of Paint Shall Be With Po Red As Per Is-5- Shade 538- 12. Inspection And Testing Of The Extinguisher Shall Be As Per Approved Qap

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604037

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of As Per Is 15683- 2018- With Latest Amendments- 1. Type Of Extinguisher Isi Marked Stored Pressure Type Co2 4.5 Kg Capacity Fire Extinguisher, Conforming To Is 15683- 2018- With Latest Amendments- .2. Extinguishing Media Carbon Dioxide Based- As Per Is 15222- 3. Expelling Medium Co2 Extinguishing Medium. 4. Type Of Extinguisher High Pressure Extinguisher- Service Pressure Greater Than 19 Bar- 5. Feature Of Fire Extinguishers Yes, Safety Devices- Mandatory For High Pressure Extinguisher-, Rechargeable Andcarrying Handle And Hose Assembly Is Mandatory As Per Clause No. 9.3 And 9.8 Of Is 6. Class Of Fire For Which Fire Extinguisher Is Suitable. Class-B And C 7. Minimum Effective Discharge Time-Minimum 8 Sec- As Per 7.2.2 Of Is 15683- 2018- 8. Material Specification For The Body Of Highpressure Extinguisher- Steel Body- As Per Latest Is 7285- 9. Carbon Dioxide Based Fire Extinguisher Capacity In Kg. 4.5 Kgs. 10. Operating Temperature Temperature Range As Mentioned In Clause No.7.1Of Is 15683- 2018. 11. Fire Ratings Of Different Class Of Fires-Minimum 34B- Higher Acceptable- General Parameters- According To Is 15683- 2018- Latest Amendment- 1. Conformity To Standard- Latest Amendments- 2. Bis Marking Yes 3. Availability Of Test Report From Central Govt. Or Nabl Or Ilac Accredited Lab To Prove Conformity To Specification Availability Of Test Report From Central Govt. Or Nabl Accredited Laboratory. Additional Technical Parameters- 1. Marking Required As Per Clause 10.2 Of Is 15683- 2018 2. Valve High Pressure Control Valve As Per Is-3224 Bearing Isi Mark And Peso- Ccoe-, Nagpur Approved. 3. Test Report And Peso Or Bis Certificate- A-Test Reports From Central Govt. Or Nabl Accredited Laboratory Shall Be Submitted Along With Supply Otherwise Material Shall Be Rejected. B-Peso- Formerly Ccoe-, Nagpur Approval Certific

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604036

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Medium Expansion Generator Specification- Foam Expansion Ration Within The Range Of 1- 300 To 1- 600.Foam Output Lpm-100-150 M3 Or Min Weight-Weight Within The Range Of 20 Kg To 25 Kg Inlet Water Pressure- Bar- 8 To 10 Smoke Exhauster-100-120 M3 Or Min At 08 To 10 Bar Inlet Pressure Material Of Construction-Body Or Shell- S.S- 304 Grade-, Nozzle-G.M, Foam Screen-Knitted Fabric Or S.S, Fan-, Alloy Aluminum, Turbine-G.M, Foam Duct- 30 M Long- Polythene, Carrying Handle And Stand-S.S, Smoke Trunk-7.5 Mtrs. Long Special Construction.

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604035

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Hydraulic Spreader Specification- Sl Parameters Value 1. Conformity To Standards As Per Nfpa 1936 With Latest Amendment 2. Dimensions- Lxbxw- Mm-Not More Than 900 X 285 X 250- + 10 Percent- 3. Working Pressure In Bar 700 4. Highest Spreading Force Not Less Than 650 Kn 5. Lowest Spreading Force Not Less Than 40 Kn 6. Spreading Distance Not Less Than 300 Mm 7. Pulling Distance Not Less Than 300 Mm 8. Highest Pulling Force Kn Not Less Than 34 Kn 9. Lowest Pulling Force- Lpf-Not Less Than 27 Kn 10. Weight Including Battery Not More Than 20 Kg 11. Replaceable Blade Of Cutter Yes 12. Type Of Teeth Of Blade Straight 13. Material Of Blade Of Cutter Dropped Forged Special Steel Alloy 14. Material Of Hinges, Pin, Lever For Protection Against Corrosion Heat Treated Tool Steel. 15. Material Of Tool Body To Ensure Less Weight High Quality Thermoplastic 16. Material Of Arm Spreader High Alloy Forged Light Metal 17. Operating Temperature Range- 25 Degc To +55 Degc 18. Type Of Battery Preferably Lithium Ion Based Rechargeable 19. Minimum Charging Time Of Battery Not More Than 120 Min 20. Connector To Connect The Tool To Any 220 V Power Source, Yes

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604034

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Hydraulic Cutter Specification- Technical Specification Or Data- Hydraulic Cutter Should Have The Following Specifications. A Cutting Force Upto Not Less Than 690 Kn B Capable Of Cutting Round Bar Not Less Than 40Mm Dia Steel Rod Of 500 550 Mpa Strength C Blade Opening At Tips Not Less Than 200 Mm. D Weight Not More Than 20 Kg Accessories- 01. Tool Kit For Changing Curved And Straight Blades With Spare Blade. 02. Connecting Hoses Of At Least 5 Meter For Connecting Pumps. 03. Compatible Pumps To Achieve Above Mention Performance Of Equipments.

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604033

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Hydraulic Ram Specification- 4. Hydraulic Spreader Sl Parameters Value 1. Conformity To Standards As Per Nfpa 1936 With Latest Amendment 2. Dimensions- Lxbxw- Mm-Not More Than 900 X 285 X 250- + 10 Percent- 3. Working Pressure In Bar 700 4. Highest Spreading Force Not Less Than 650 Kn 5. Lowest Spreading Force Not Less Than 40 Kn 6. Spreading Distance Not Less Than 300 Mm 7. Pulling Distance Not Less Than 300 Mm 8. Highest Pulling Force Kn Not Less Than 34 Kn 9. Lowest Pulling Force- Lpf-Not Less Than 27 Kn 10. Weight Including Battery Not More Than 20 Kg 11. Replaceable Blade Of Cutter Yes 12. Type Of Teeth Of Blade Straight 13. Material Of Blade Of Cutter Dropped Forged Special Steel Alloy 14. Material Of Hinges, Pin, Lever For Protection Against Corrosion Heat Treated Tool Steel. 15. Material Of Tool Body To Ensure Less Weight High Quality Thermoplastic 16. Material Of Arm Spreader High Alloy Forged Light Metal 17. Operating Temperature Range- 25 Degc To +55 Degc 18. Type Of Battery Preferably Lithium Ion Based Rechargeable 19. Minimum Charging Time Of Battery Not More Than 120 Min 20. Connector To Connect The Tool To Any 220 V Power Source, Yes

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604032

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Ejector Pump Specification- Specification 1. Material Of Construction- Aluminium Alloy 2. Maximum Working Pressure- 10Kg Or Cm2 3. Minimum Working Pressure- 5Kg Or Cm2 4. Test Pressure- 21Kg Or Cm2 5. Inlet Diameter- 100 Mm- Is- 902-, Male Round Threaded 6. Outlet Diameter- 100 Mm- Is- 902-, Male Round Threaded 7. Inst. Inlet- 63 Mm- Is- 903-Instantaneous Male 8. Discharge- 650Lpm At 7Kg Or Cm2 9. Max Suction Depth- 10 Meters

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604030

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Standard Is 8096- 1992 Fire Beaters Are Often Used For Putting Off Small Fires Such As Wild Grass, Shrubs, Dry Vegetation, Hay, Plastic, Coal Which Can Be Easily Put Out By Beating And Smothering. This Piece Of Equipment Finds Much Application In Rural Areas And In Those Places Where There Is A Scarcity Of Water Components 1. Handle- I-The Handle Shall Be Made Of Solid Bamboo Having 1800 Mm Length And 30 + 5 Mm Diameter Or Of Some Alternative Material Of Heat Insulate Properties Provided. The Handle Shall Be Finished Smooth.- Ii-The Handle Before Fitting Into The Socket Made In Shank Shall Be Liberally Swabbed With Termite Resistant Composition Comprising 10 Percent Solution Of Acid-Chromate Composition In Water. It Will Then Be Allowed To Dry For At Least 24 Hours.- Iii-The Free End Of The Bamboo Handle Shall Be Protected From Disintegrating By Fitting With A Hollow Close Ended Cap Made Of Chrome Plated Mild Steel Or Aluminium. The Protective Cap Shall Have Knurling Made On Its Outer Surface To Enhance Grip At Least 5 Mm Of The Round Edges Of This Knurled Protective Cap Shall Be Chamfered All Round At 45 Degree To Reduce Sharpness 2. Blade The Blade Of The Fire Beater Shall Consist Of A Rectangular Piece Of Expanded Mild Steel Or Steel Or Steel Wire Mesh Measuring 452 Mm X 352 Mm, Covered Fully On Both Sides With Stretched Fire Resistant Canvas Olive Green In Colour Placed Between Two Frames And Securely Fixed In Position With Hexagonal Nut-Bolts Using Spring Washers All-Round The Frame The Two Pieces Frame Shall Be Made Of 1 Mm Thick Mild Steel. The Width Of Frame Shall Be 30 Mm. The Shank Portion Of The Blade Shall Also Be In Two Pieces Made Of 1 Mm Thick Spring Steel. The Frame Shall Be Welded At Diagonals As Per Is Assembling The Blade So Made Shall Be Fixed With Bamboo Handle Through A Two Piece Shank. The Socket Part Of The Shank Shall Be Tightly Screwed To The Bamboo Handle By Two Bolts, Nu

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604029

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Celling Hook Specification- Specification Of Fire Hook Standard Is 927- 2008 The Function Of Fire Hook Is To Pierce Celling To Allow The Water On The Upper Floor To Drain Away, To Pull Down Thatched Roofs Or Roofs Made Out Of Matting, Pulling Out Bales And Bags Of Various Commodities From A Distance,Opening And Closing Down Of Doors And Various Similar Jobs Technical Features- Material Shall Steel To Be Used For Hook Conform Is 2004- 1978- Handle Shall Be Made Of Bamboo Of Length Not Less Than 3 M- The Edges Shall Be Well Shaped And Finished- Forgings Shall Be Free From Seams, Burrs Cracks And Other Surface Defect- Hook Shall Be Treated With Suitable Anti Corrosive Paint- Hook Shall Be Engaged To Horizontal Bar And Weight Of 140Kg Shall Be Applied Vertically To The Handle .The Test Hall Be Repeated Ten Times .The Hook Shall Not Bend And Or Or Dent During The Test.- Standard Is 927- 2008 Marking Each Hook Shall Be Cleary And Permanently Marked With The Following Information- Manufacturer S Name Or Trade Mark- Size Of Handle- Year Of Manufacture- Marked With Standard Mark Note- The Equipment Should Be Procured From The Manufacturers- Manufacturer Needs To Have All Test Or Evaluation Facility In House Failing Which The Test Evaluation Should Got Done From Govt. Lab Or Govt. Approved Nabl Accredited Lab Only- Pre Dispatch Inspection-Pdi Clause Is Mandatory And To Be Incorporated At The Time Of Indent Of Above Fire Equipment. The Cisf Representative For Inspection Or Pdi Shall Be Detailed By Fire Directorate New Delhi

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604028

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Life Jacket Specification- Technical Requirement- A-It Shall Be Made Up Of High Visibility Nylon Orange Coloured Cloth Filled With High Density Soft Polyethylene Foam To Provide High Floatability.- B-Jacket Shall Be Provided With Suitable Plastic Quick Lock Buckle And Velcro For Tightening.- C-Irs Approved Water Activated Life Jacket Light Should Be Provided With Life Jacket.- D-Whistle Shall Be Attached With Jacket And Solas Approved Retro- Reflective Tape Stitched At Visible Locations Covering A Total Area Not Less Than 400Cm.- E-It Shall Be Suitable For Major Application Is Floods And Sea Or River Mishaps.- F-Life Jacket Shall Have Size Not Less Than 68 X 42 X 10 Cm.- G-Floatability Shall Not Be Less Than 16.5Kgs.- H-Weight Of Jacket Shall Not Be More Than 750Gms- + Or- 100Gm- .

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604027

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Lifebuoy Specification- 2. Technical Requirement- A-The Lifebuoy Shall Be Irs Approved.- B-Lifebuoy Shall Be Made Up Of, High Visibility, Impact Resistant Orange Pe Material Filled With High Density Soft Polyurethane- Pu-Foam Which Gives High Floatability.- C-Lifebuoy Shall Be Provided With A Grab Line Attached At Four Equally Spaced Points.- D-Lifebuoy Shall Have Solas Retro- Reflective Tape Stuck At Four Equally Spaced Places.- E-Lifebuoy Should Be Suitable For Major Application Is Rescue During Floods And Sea Mishaps.- F-Lifebuoy Should Have Od 71 +- 1 Cms,Id 45 +- 1 Cms.- G-Lifebuoy Should Have Buoyancy More Than 17 Kg.- H-Lifebuoy Shall Be Moisture Proof And Non-Inflammable. 3. Approvals- A-Lifebuoy Shall Be Irs Approved.- B-Lifebuoy Shall Conforms To Solas 74 As Amended Reg. Iii Or 4,Iii Or 7.1,Iii Or 34,X Or 3 Lsa Code Reg. I Or 1.2 And Ii Or 2.1.1 Imo Resolution Msc.81- 70-, Msc. 200- 80-, Msc.97- 73-8.1,8.3.

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604026

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Stretcher Specification- Stretcher Sl Parameters Value 1. Unfolded Size Of The Stretcher- L X W X H- Not Less Than 201 X 53 X 13- Cm-With Tolerance Of +- 2 Mm 2. Number Of Folds Which Can Be Made Not Less Than 02 3. Material Of The Stretcher Frame Aluminium Or Powder Coated Mild Steel 4. Material Of The Support Bed Of The Foldable Stretcher Vinyl Coated Nylon Fabric Or Tetron Canvas 5. The Foldable Stretcher Shall Fold Lengthwise And Cross Wise And Shall Fold Flat For Compact Storage And Asy Transportation Yes 6. Support Bed Of The Foldable Stretcher Shall Be Stain And Water Resistant And Easy To Clean And Antifungal Yes 7. Foldable Stretcher Shall Have Aluminium Feet To Prevent Stretcher Bed From Touching The Floor Yes 8. Aluminium Poles Shall Have Rubber Hand Grips To Keep A Firm Grasp On The Stretcher Yes 9. Minimum Load Carrying Capacity Of The Foldable Stretcher No Less Than 160 Kg 10. Weight Of The Foldable Stretcher Not More Than 20 Kg 11. Foldable Stretcher Should Have Patient Restrain Strap With Double Locking Quick Release Safety Buckets Yes 12. Vertical Hoisting Sling To Be Provided Yes

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604024

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Smoke Blower Cum Exhauster. Specification- It Should Be Portable, High Output Smoke Exhauster, Petrol Driven Engine- 5.5 Hp-And Should Be Of Size 18 Inch Or Above. 2. It Should Be Able To Provide Both Positive And Negative Pressure Ventilation To Serve Dual Application I.E. As A Blower As Well As Suction For Clearance Of Smoke Or Gases Even In Confined Or Closed Non Ventilated Areas 3. The Exhauster Should Be Compact In Dimension Or Size And Should Not Measure More Than 20- Height-X 20- Width-X 15- Depth-With A Tolerance Of + Or- 10 Percent So That It Can Be Easily Placed In The Fire Tender Compartment If So Required. 4. The Exhauster Unit Should Be Light In Weight And Weigh Less Than 35 Kg With A Tolerance Of + Or- 10 Percent . 5. The Exhauster Should Have High Output Airflow For Effective De Smoking Operations. 6. The Fan Size Should Be 18 Diameter With Many Turbo Blades To Generate Strong Air Force. 7. The Dimensions Should Not Exceed 18 Inch In Depth, 24 Inch In Width And 24 Inch In Height Blade- 18 Diameter Assembly Should Made Up Of Aluminium Or Air Flex Fiberglass Reinforced Polyamide Blades Frame- It Should Formed And Welded Sheet Metal Construction With Powder- Coat Finish. Grille- Should Continuous Circular Wound External- Weld Steel Wire With 4 Tie Points For Additional Safety- Steel Is Zinc-Plated With A Clear Chromate Finish

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604023

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Suction Hose 100Mm Specification- Suction Hose Synthetic Of 100 Mm Internal Dia And Length 2.5 Mtr. Confirming To Is 3549 Latest Revision. It Must Be Fully Wire Embedded Suction Hose, Which Can Be Used From Suction Side Of The Pump From Source To Pump In-Let. The Suction Hose Mostly Binded With Copper Wire With Isi Marked Male And Female Threaded Coupling As Per Is 902- Latest Revision-And Shall Have 04 Lugs. The Hose Shall Be Subjected To An Internal Hydraulic Pressure Of 8 Kg Or Cm2 For A Period Of Three Minutes And There Shall Be No Sign Of Leakage Or Failure. The Working Vacuum Shall Be Down To 635 Mm Of Mercury Without Collapse. Coupling Must Be Tested For Hydraulic Pressure Test At 21 Kg Or Cm2 For A Period Of 02 Minutes. The Suction Hose Must Be Protected Against Oil, Fungus, Chemicals, Acid And Alkalis.

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604022

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Aluminium Fire Suit Specification- The Suit Shall Allow The Wearer To Expose Himself And Withstand Point Source Approximately At 900 Degc For 4-5 Minutes, 700 Degc For 15 Minutes And 500 Degc For 5 Hours Without Adversely Affecting The Wearer .The Fabrication Of Fire Proximity Or Approach Suit Shall Be Made Out Of Non-Flammable, Light Weight, Non-Toxic Flexible And Heat Reflecting Material. The Fabric Shall Be Of Impermeable Aluminized Coated Oxidized Penotex Carbon Fiber And Shall Have Thermal Insulation Lining Capable Of Resisting High Temperature Not Less Than 900 Degc.Max.Wt-9.0 Kg.

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604021

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of High Expansion Foam Generator Specification- High Expansion Foam Generator Shall Driven By Water Pressure And Used For Coverage For Large Spill Of Hydrocarbon Liquids,Total Flooding Of Voluminous Enclosure Such As Cable Ducts And In Accessible Locations. It Should Be Light Weight, Compact, Suitable For Groundoperation And Easy Movement. It Should Have Arrangement For Smoke Extraction Also. It Should Have Pressure Gauge Of Suitable Rating At Inlet For Measuring Pressure Of Water Flow. A Carrying Handles And Wheels Should Be Provided For Easy And Smooth Carriage.Body- Ss Or Frp Materials To Be Specified By Indentor 2. Nozzle- Gun Metal 3. Foam Screen- Ss 4. Piping And Foam Inductor- Light Weight Material With Anti Corrosive Treatment 5. Fan- Fibre Reinforced Plastic- Frp-Or Ss-Material To Be Specified By Indentor- 6. Coupling- Gun Metal 7. Foam Duct- Nylon Or Polythene- Material To Be Specified By Indentor- 6.0 Dimension Of The Body- Shell-And Attachment- 1. Depth- 450- 500 Mm 2. Width- 900- 950 Mm 3. Height- 900- 1000 Mm 4. Foam Duct- 10 Meter Long 5. Smoke Duct- 10 Meter Long 6. Coupling Diameter- 63 Mm- Instantaneous Type- 7. Maximum Unit Weight- 50 Kg

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604020

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Floating Pump Specification- Pump And Engine Specification Casing-Powder Coated Anodized Aluminum As Per Is 617 Impeller- Bronze Impeller 3. Engine Specification. Engine Shall Meet Applicable Environmental Norms And Emission Standard Of Govt. Of India. 4 Stroke Air Cooled Petrol Engine Power Output- Not Less Than 5.9 Hp Ignition System- Transistorized Magneto Starting System-Recoil Type Of Pump- Single Suction, Centrifugal Outlet- 63 Mm Instantaneous Water Discharge-Not Less Than 900 I Or Min Delivery Head-10 Meter Min Water Depth- 25 Mm Of Water Discharge Of Solid-Up To 15 Mm Size Automatic Float Controlled Throttle 4. Fuel Tank Appropriate For Continuous Run Of At Least 1 Hrs And Should Equipped With Fuel Gauge. 5. Float Assembly Hdpe Shell Or Fiber Glass With Polyurethane Foam. 23Outlet- 63 Mm Instantaneous Water Discharge-Not Less Than 900 I Or Min Delivery Head-10 Meter Min Water Depth- 25 Mm Of Water Discharge Of Solid-Up To 15 Mm Size Automatic Float Controlled Throttle 4. Fuel Tank Appropriate For Continuous Run Of At Least 1 Hrs And Should Equipped With Fuel Gauge. 5. Float Assembly Hdpe Shell Or Fiber Glass With Polyurethane Foam

  • Location: Etah, Uttar Pradesh

  • Last Date: 02 May 2026

  • Amount: Ref. Doc.

Ref. No: 55604018

GeM Tender
More Detail
UTTAR PRADESH STATE INDUSTRIAL DEVELOPMENT CORPORATION LIMITED

Supply And Installation Of External Development Work And Street Light Network System Along With 03 Years Amc For Entire Network At Ia. Orni Distt. Etah

  • Location: Etah, Uttar Pradesh

  • Last Date: 07 May 2026

  • Amount: 2.21 Cr.

Ref. No: 55603119

More Detail
PUBLIC WORKS DEPARTMENT

New Construction Work Of The Road From Jiroliya To Shivmandir Via Sps Junior High School In The Fy 2025-26

  • Location: Etah, Uttar Pradesh

  • Last Date: 22 Apr 2026

  • Amount: 95.00 Lac

Ref. No: 55599101

More Detail
PUBLIC WORKS DEPARTMENT

Renewal Work On Dhumari Saroth Sankisa Road In Fy 2025-26

  • Location: Etah, Uttar Pradesh

  • Last Date: 22 Apr 2026

  • Amount: 1.27 Cr.

Ref. No: 55599100

More Detail
PUBLIC WORKS DEPARTMENT

New Construction Work Of The Road From Village Band Nagar To Ramnagariya Asharam In The Fy 2025-26

  • Location: Etah, Uttar Pradesh

  • Last Date: 22 Apr 2026

  • Amount: 97.88 Lac

Ref. No: 55599099

More Detail
PUBLIC WORKS DEPARTMENT

New Construction Work Of The Road From Nagla Kanholi Chowk To Near Khadeet At Ishan River Dist Etah Boundary In The Fy 2025-26

  • Location: Etah, Uttar Pradesh

  • Last Date: 22 Apr 2026

  • Amount: 3.10 Cr.

Ref. No: 55599098

More Detail
DEPARTMENT OF URBAN LOCAL BODIES

Supply Of Octagonal Pole (V2)

  • Location: Etah, Uttar Pradesh

  • Last Date: 21 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55593552

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Repair, Maintenance, And Installation Of Plant/Systems/Equipments (Version 2)- Office Space; Networking

  • Location: Etah, Uttar Pradesh

  • Last Date: 27 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55593550

GeM Tender
More Detail
PUBLIC WORKS DEPARTMENT

New Construction Work Of The Road From Masooliya To Nagla Dhakan Via Nagla Ramsingh In The Fy 2025-26

  • Location: Etah, Uttar Pradesh

  • Last Date: 22 Apr 2026

  • Amount: 1.19 Cr.

Ref. No: 55592593

More Detail
UTTAR PRADESH HOUSING AND DEVELOPMENT BOARD

Construction Of Excellence Center At Govt. Polytechinc, Nagariya Mod District Etah

  • Location: Etah, Uttar Pradesh

  • Last Date: 11 May 2026

  • Amount: 5.69 Cr.

Ref. No: 55592020

More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Hydraulic Motor Hmb-5.0

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587322

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo Sb02-475-A6Mb Filter/Regulator Sb02-475-A6Mb-X-Xxx- Xxx Shavo Filter Cum Regulator Combination Unit Citations Series 1/2 Inches T-Handle Type, With Gauge, Relieving Type, Metal Bowl Automatic Drain Range 1.00- 10.00 Bar- 10-150 Psi

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587321

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo Sb60K-4N-A6D-Rnln Air Filter Regulator Model- Afr Shavo Sb60K-4N-A6D-Rnln Connection1/2 Inches Npt, Max Inlet Pressure-18 Kg/Cm2, Sec Pressure Range- 0.7-7.0 Kg/Cm2, With Mounting Bracket, Make Shavo Hsn Code

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587320

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo 11-4Sn-200L-A6Kn-Ns Air Filter Regulator Model-11-4Sn-200L-A6Kn-Ns Connection1/4 Inches Npt, Max Inlet Pressure-17.5 Kg/Cm2, Sec Pressure Range 0.7-7.0 K

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587319

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo Sb20K-3N-A6D-Rgmb Filter/Regulator Sb20K-3N-A6D-Rgmb-Xxx- Xxxshavo Filter Cum Regulator Combination Unit Vayu 3/8 Inches Basic Knob Type With Nitrile Elastomer 3/8 Inches Npt X Npt Automatic Drain

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587318

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo Sb60T-2Na6D- Rgmn Air Filter Regulator Range-0 To 10 Kg/Sqcm Model No-Sb60T-2Na6D/Rgmn Make- Shavo

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587317

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo 11-4Sn-201L-A6Kn-Nb Air Filter Regulator, Model No. 11-4Sn-201L-A6Kn-Nb, Make- Shavo

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587316

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo 11-4Sn-202L-A6Knnb Filter/Regulator 11-4Sn-202L-A6Kn-Nb-X-Xxx- Xxx Instrument Filter /Regulator With Ss Trim 1/4 Inches Relieving, Knob Type, With Ms Pressure Gauge

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587315

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo 11-4Sn-401L-A6Kgnb Filter/Regulator 11-4Sn-401L-A6Kg-Nb-X-Xxx- Xxx Instrument Filter /Regulator With Ss Trim 1/2 Inches Relieving, Knob Type, With Ms Pressure Gauge

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587314

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo Sb02-225-A6Ma Filter/Regulator Sb02-225-A6Ma-X-Xxx-Xxx Shavo Filter Cum Regulator Combination Unit Citations Series 1/4 Inches Knob Type, With Gauge

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587313

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo Sb02-225-A6Mb Filter/Regulator Sb02-225-A6Mb-X-Xxx-Xxx Shavo Filter Cum Regulator Combination Unit Citations Series 1/4 Inches Knob Type, With Gauge

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587312

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Afr Shavo Sb02-475-A6Ma Filter/Regulator Sb02-475-A6Ma-X-Xxx- Xxx Shavo Filter Cum Regulator Combination Unit Citations Series 1/2 Inches T-Handle Type, With Gauge, Relieving Type, Metal Bowl Automatic Drain Range 1.00- 10.00 Bar- 10-150 Psi

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587311

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Gbf Endless Belt 1168Mm Width

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587310

GeM Tender
More Detail
UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LIMITED

Supply Of Submersible Sewerage Pump

  • Location: Etah, Uttar Pradesh

  • Last Date: 20 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55587309

GeM Tender
More Detail
UTTAR PRADESH HOUSING AND DEVELOPMENT BOARD

Construction Of Guard Room, Boundrywall, C.C. Road Renovation And Solar Lighat Fixing At Iti Etah, District Etah

  • Location: Etah, Uttar Pradesh

  • Last Date: 29 Apr 2026

  • Amount: 1.62 Cr.

Ref. No: 55583043

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Connecting Road From Dalshahpur Jamlapur Road To Kesari Field

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 56.80 Lac

Ref. No: 55583022

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Connecting Road From Karimpur To Kunwari Under The Sakit Block Of Etah District

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 64.40 Lac

Ref. No: 55583011

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Link Road From Kartala Barauli Link Road To Jalalpur Residential Area

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 79.90 Lac

Ref. No: 55583005

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Connecting Road From Chitrank Girls Junior High School To Nagla Laxman In The Village Of Kartala Kaveerpur Shitalpur Development Block Etah District

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 42.60 Lac

Ref. No: 55583004

More Detail
RURAL ENGINEERING DEPARTMENT

Daspur Mod Bebar On Sauhar Minor Construction Of A Link Road From The Feeder Canal To Kunwarpur Nagariya

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 70.70 Lac

Ref. No: 55583003

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Link Road From Bakalpur Chaprai Sakit Road To Nagla Bhajua Road

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 61.60 Lac

Ref. No: 55583002

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Link Road From Kansuri Village Of Shitalpur Development Block Of Etah District To Nagmai On Bamba

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 59.60 Lac

Ref. No: 55583001

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of Link Road From Bakalpur Chaprai Road To Chaprai Road

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 61.60 Lac

Ref. No: 55583000

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Link Road From Badhauli To Nagla Khargi Road

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 78.70 Lac

Ref. No: 55582999

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Link Road From Noorpur Lakhapur Village Of Sakit Development Block Of Etah District To Nagla Padriyan Road

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 42.50 Lac

Ref. No: 55582998

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Link Road From Garhwala To Nagla Jhijhai

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 54.80 Lac

Ref. No: 55582997

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Link Road From Bhogpur Road To Khutiyana

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 36.00 Lac

Ref. No: 55582996

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Connecting Road From Karimpur Pucca Road To Nagla Phule In The Sakit Development Block Of Etah District

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 54.60 Lac

Ref. No: 55582995

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Connecting Road From Nagla Baljit Majra Uchham Village To Bhurrka

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 73.30 Lac

Ref. No: 55582994

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Link Road From Village Nagla Bari To Dadupur Asgarpur

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 57.90 Lac

Ref. No: 55582991

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Connecting Road From Village Nakatai Khurd To Parshuram Farm

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 69.80 Lac

Ref. No: 55582989

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of A Link Road From Jaithra Medupura Road To Sokha.

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 50.10 Lac

Ref. No: 55582988

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of Link Road From Bara Samaspur Road To Belpipri

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 53.80 Lac

Ref. No: 55582987

More Detail
UTTAR PRADESH STATE ROAD TRANSPORT CORPORATION

Canteen Of Etah Bus Stand

  • Location: Etah, Uttar Pradesh

  • Last Date: 28 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55580503

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of Link Road From Village Ubhai Asadpur To Tamraura Road

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 84.10 Lac

Ref. No: 55580183

More Detail
RURAL ENGINEERING DEPARTMENT

Jaleswar Agra Road From Gudau To Nagla Sukhiman Singh Construction Work

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 38.70 Lac

Ref. No: 55580135

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Work Of Link Road From Village Rasidpur Mitraul To Khanjapur

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 49.70 Lac

Ref. No: 55580132

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of Link Road From Village Galarpur To Fardpura

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 1.12 Cr.

Ref. No: 55580129

More Detail
RURAL ENGINEERING DEPARTMENT

Construction Of Link Road From Kansuri Culvert To Village Banhara

  • Location: Etah, Uttar Pradesh

  • Last Date: 16 May 2026

  • Amount: 84.00 Lac

Ref. No: 55580098

More Detail
DEPARTMENT OF EDUCATION

Supply Of Pillow Cover- Cotton

  • Location: Etah, Uttar Pradesh

  • Last Date: 27 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55574944

GeM Tender
More Detail
DEPARTMENT OF EDUCATION

Supply Of Pillow- Cotton

  • Location: Etah, Uttar Pradesh

  • Last Date: 27 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55574943

GeM Tender
More Detail
DEPARTMENT OF EDUCATION

Supply Of Quilt With Cover- Velvet 7 Feet X 4 Feet (L X W)

  • Location: Etah, Uttar Pradesh

  • Last Date: 27 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55574941

GeM Tender
More Detail
DEPARTMENT OF EDUCATION

Supply Of Mattress- 4 Inch Foam

  • Location: Etah, Uttar Pradesh

  • Last Date: 27 Apr 2026

  • Amount: Ref. Doc.

Ref. No: 55574940

GeM Tender
More Detail